TV Fool  

Go Back   TV Fool > Additional Resources > Forum Sandbox

Notices

Reply
 
Thread Tools
Old 25-Jan-2021, 3:21 AM   #1
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,750
TV SNR and Mediasonic HW150 Signal Quality Comparison

TV SNR and Mediasonic HW150 Signal Quality Comparison

Knowing the SNR or signal quality of an OTA channel can be very helpful when comparing antennas or finding the best antenna location.

Since many TVs don't show SNR or signal quality, I did a comparison between SNR on my SONY TV and Signal Quality on the Mediasonic-HW-150.

Code:
TV SNR and Mediasonic HW150 Signal Quality Comparison

Channel 16 signal power with no attenuation:
 +3.3 dBmV (-47.5 dBm)

Attenuation   SONY SNR   Mediasonic HW150

NONE           31 dB           83%
30dB           24 dB           61%
30dB+Var       17 dB          42-43%
30dB+Var       16 dB           41%
30dB+Var       15 dB           39%
30dB+Var      14-15 dB        0-38%
30dB+Var       14 dB           0%  Severe pixelation
Variable attenuation was increased for desired SNR.

SETUP:
Ant > preamp 17dB > attenuator > 4-way splitter for:
1. SONY KDL-40R350D
2. Mediasonic HW150
3. Sadelco DisplayMax 800 Signal Level Meter
4. Airspy R2 SDR with Spectrum Spy software for
spectrum screenshots made at SNR 31, 24, and 15 dB

Other equipment used:
Channel Master 7777HD Preamp, at Low 17 dB
4-way splitter
10 dB fixed attenuator
20 dB fixed attenuator
0-20 dB Toner variable attenuator

CODE data above saved as image:



Here are the screenshots of the CH16 signal at SNR 31, 24, and 15 dB:







This is a screenshot of the Mediasonic HW150 for CH20 at the "Digital Cliff."



The Mediasonic HW-150 has a built-in power supply and outputs for HDMI, Component, and Composite. (Composite is also known as CVBS for Composite Video Baseband Signal) The less expensive HW-130 has a separate wall-wart power supply and outputs for HDMI and Composite; no Component output.



Both models are able to add a channel after scan, which is very useful if you have more than one antenna or a rotator. Tyler the Antenna Man uses the HW-130 for antenna comparisons.



This is the link to Tyler's video:
https://www.youtube.com/watch?v=YDQzvFG3chs
Attached Images
File Type: jpg TV SNR and HW150 SQ 100pct_1.jpg (147.4 KB, 3073 views)
File Type: jpg TV SNR and HW150 SQ 80pct_1.jpg (104.4 KB, 3052 views)
File Type: jpg TV SNR and HW150 SQ 90pct_1.jpg (128.4 KB, 4890 views)
File Type: jpg 1-24-2021 CH16 Test1 NoAtt_2.jpg (124.7 KB, 4826 views)
File Type: jpg 1-24-2021 CH16 Test2 Att30_2.jpg (120.6 KB, 4852 views)
File Type: jpg 1-24-2021 CH16 Test3 Att30andVar_2.jpg (128.8 KB, 4759 views)
File Type: jpg MediasonicHW-150 CH20atDigitalCliff_2.jpg (141.9 KB, 4741 views)
File Type: jpg Tyler-How to Add Channels_1.jpg (133.8 KB, 5651 views)
File Type: jpg Mediasonic HW-150 RearPanel.jpg (106.1 KB, 4795 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 18-Sep-2023 at 5:35 PM.
rabbit73 is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Additional Resources > Forum Sandbox


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 12:07 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC