TV Fool  

Go Back   TV Fool > Over The Air Services > Special Topics

Notices

Reply
 
Thread Tools
Old 16-Mar-2017, 1:02 AM   #1
nickgalliart
Junior Member
 
Join Date: Aug 2016
Posts: 10
Antenna grounding

Hello,
I am helping my in-laws install an antenna and I have a question about grounding the mast of the antenna. The antenna is mounted on a 1.5" pipe buried 4 feet in the ground. I purchased a coax grounding block for the cable. Do I need to ground the antenna mast itself? If i do need to ground the antenna, what are your recommendations?

Thanks

-Nick
nickgalliart is offline   Reply With Quote
Old 16-Mar-2017, 4:31 PM   #2
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
Yes, I would recommend that you ground both the mast and the coax shield...

Have a look at this thread... http://forum.tvfool.com/showthread.php?t=901 Particularly post #20

If you need more specific info, feel free to ask detailed questions.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')
GroundUrMast is offline   Reply With Quote
Old 16-Mar-2017, 7:05 PM   #3
nickgalliart
Junior Member
 
Join Date: Aug 2016
Posts: 10
Thanks for the reply!

The pole for the antenna is in the ground about 20 feet away from the house's electrical service ground. If I use a grounding device like what is in your profile picture, should I just run a separate AWG wire to the house's electrical service ground?
nickgalliart is offline   Reply With Quote
Old 16-Mar-2017, 7:38 PM   #4
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
If you want an answer that is in in accordance with the NEC, the only kind that Tom or I or or anyone else who is informed will give, here it is: "The mast's embedment in the ground does not meet the requirements of the NEC for grounding purposes."

Now, should you properly bond the mast and the coaxial cable's shield to your structure's ground electrode system, then your installation does meet the criteria set out in the national code.

You'd do best to call a local building inspector (if any), a local electrician, or bone up on the NEC as a study of interest.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 16-Mar-2017, 8:36 PM   #5
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
Quote:
Originally Posted by nickgalliart View Post
Thanks for the reply!

The pole for the antenna is in the ground about 20 feet away from the house's electrical service ground. If I use a grounding device like what is in your profile picture, should I just run a separate AWG wire to the house's electrical service ground?
That's what I have done with my masts; A dedicated bonding connection from the mast to the existing electrical service grounding system using #10 AWG. I treat the coax shield bonding as a separate, but equally important connection.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')
GroundUrMast is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Special Topics



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 9:32 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC