TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools
Old 14-Jul-2012, 12:04 AM   #21
GroundUrMast's Avatar
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
Here in Seattle, it's hard to find anyone stocking antenna parts. I would consider trying the RS hardware after putting a few coats of outdoor enamel paint on them.

It sounds like RS is offering something like this:

Connector boots don't seal as well as this: which I have also purchased at Home Depot. I put a couple wraps of black electrical tape over the 2228 to protect it from UV rays and dust/dirt which sticks to the tacky surface of the 2228. Products such as Coax-Seal are equivalent.
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 14-Jul-2012 at 12:12 AM.
GroundUrMast is offline   Reply With Quote
Old 14-Jul-2012, 12:51 AM   #22
Senior Member
Join Date: Nov 2011
Posts: 1,832
->ALL<- Questions and Answers about Broadcast Tv Reception and More. , most likely has the replacement hardware.
Electron is offline   Reply With Quote


Go Back   TV Fool > Over The Air Services > Help With Reception

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT. The time now is 5:53 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC