TV Fool  

Go Back   TV Fool > Over The Air Services > Special Topics

Notices

Reply
 
Thread Tools
Old 24-Jul-2018, 7:13 PM   #1
BrooklinOTA
Member
 
Join Date: Dec 2013
Posts: 41
Caulking the screws of an eave mount

Hi Everyone,

I have just moved into a new house and would like to mount my 8 bay antenna to the eave of the house with an eave mount kit (CM-9030). As I plan to screw the eave mount kit at the peak of the roof, should I use a basic silicone caulk to seal the screws or are they okay without the caulk?

Thanks!
BrooklinOTA is offline   Reply With Quote
Old 24-Jul-2018, 9:48 PM   #2
JoeAZ
Senior Member
 
Join Date: Mar 2017
Posts: 413
While you probably don't need to caulk, it might be a good
idea to do so. It is a whole lot easier to remove some caulk
over a screw than trying to unloosen a rusted one............
Be sure to ground your system. It not only protects from
nearby lightning but also can improve reception.
JoeAZ is offline   Reply With Quote
Old 24-Jul-2018, 10:58 PM   #3
OTAFAN
Senior Member
 
Join Date: Apr 2015
Posts: 261
https://www.amazon.com/Universal-Ele...ords=coax+seal


You can also try Coax Seal linked above. I believe you can also find it at some electronics stores and if memory serves me, I think the company that manufactures it has a website.


I have found it easy to use and remove, but I've seen a comment or two in the past on the Net from those who didn't seem to like it. But I would recommend it.


All the best!
OTAFAN is offline   Reply With Quote
Old 25-Jul-2018, 1:33 PM   #4
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,750
Quote:
Originally Posted by BrooklinOTA View Post
I have just moved into a new house and would like to mount my 8 bay antenna to the eave of the house with an eave mount kit (CM-9030). As I plan to screw the eave mount kit at the peak of the roof, should I use a basic silicone caulk to seal the screws or are they okay without the caulk?
A tripod mount penetrates the roof, but an eave mount doesn't penetrate the roof:
http://dennysantennaservice.com/1476678.html


How do I assemble my CM-9030 Adjustable Eave Mount?
https://support.channelmaster.com/hc...le-Eave-Mount-
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 25-Jul-2018 at 2:28 PM.
rabbit73 is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Special Topics



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 6:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC