TV Fool  

Go Back   TV Fool > Over The Air Services > Special Topics > Antennas

Notices

Reply
 
Thread Tools
Old 2-Mar-2014, 4:47 PM   #1
Lewis
Junior Member
 
Join Date: Mar 2014
Posts: 19
Lava OmniPro HD-8000

Hi , Is anyone familiar with what the inside of this antenna is supposed to look like? I firstly wanted to say I think the unit is working fine but I have one of these OmniPro HD-8000 units as a backup for an 8 bay bow tie antenna for about 3 to 4 months now and had one of the antenna masts down putting a 2 meter yagi on it & I decided I wanted to look under the cover of the OmniPro HD-8000 out of curiosity before I put it all back up & when I took the cover off I noticed the red wire running around the perimeter of the casing was open relatively for a few inches as per the attached file picture which brings me to the question I wanted to ask. Is this the way the antenna is designed or is that red wire supposed to be a complete loop?
Attached Images
File Type: jpg hd8000-2.jpg (226.0 KB, 1076 views)
Lewis is offline   Reply With Quote
Old 16-Mar-2014, 4:04 AM   #2
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
Looks like a modified dipole... Which can work as a folded, closed loop or as two separate elements.

I hope you didn't pay too much. The advertised prices I've seen for this are outrageous for the real performance and build quality.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 16-Mar-2014 at 4:07 AM.
GroundUrMast is offline   Reply With Quote
Old 16-Mar-2014, 6:56 PM   #3
teleview
Guest
 
Posts: n/a
+=>
-----
The copper wire is a director element.

The copper wire receives and re radiates the Tv signal to the rest of the metal reception elements and acts to distribute the received Tv signal more evenly to the other metal reception elements.
  Reply With Quote
Old 17-Mar-2014, 11:56 AM   #4
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Most likely the wire is intended to be the VHF reception element.

You'd have to provide a photo of the rest of the internals including the area where that wire attaches to know for certain.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 12-Apr-2014, 6:37 AM   #5
Lewis
Junior Member
 
Join Date: Mar 2014
Posts: 19
Quote:
Originally Posted by GroundUrMast View Post
Looks like a modified dipole... Which can work as a folded, closed loop or as two separate elements.

I hope you didn't pay too much. The advertised prices I've seen for this are outrageous for the real performance and build quality.
Ty for the reply, yes I bought new & paid way too much for what it is & can do @ around $70. The advertised Antenna Gain: VHF: 28dB UHF: 30dB @ website http://www.lavasat.com/en/upload/pro...000_Manual.pdf is a big laugh & it is not recommended from my end as what a homeowner might want for a ground plane antenna but it might please a traveler with a mount on an RV due to the size. Lava did reply to me & said it was designed that way but no elaboration of what purpose the little wire achieved.
Lewis is offline   Reply With Quote
Old 12-Apr-2014, 6:38 AM   #6
Lewis
Junior Member
 
Join Date: Mar 2014
Posts: 19
Quote:
Originally Posted by teleview View Post
+=>
-----
The copper wire is a director element.

The copper wire receives and re radiates the Tv signal to the rest of the metal reception elements and acts to distribute the received Tv signal more evenly to the other metal reception elements.
I am pretty sure a 9" aluminum pie pan has more metal than this thing.
Lewis is offline   Reply With Quote
Old 12-Apr-2014, 6:42 AM   #7
Lewis
Junior Member
 
Join Date: Mar 2014
Posts: 19
Quote:
Originally Posted by ADTech View Post
Most likely the wire is intended to be the VHF reception element.

You'd have to provide a photo of the rest of the internals including the area where that wire attaches to know for certain.
The wire connected to an internal pc board on each end, which I presume was also part of an amplifier.
Lewis is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Special Topics > Antennas


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 11:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC