TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 4-Jan-2012, 7:52 PM   #21
JeffKnob
Junior Member
 
Join Date: Nov 2011
Posts: 11
Can someone recommend are more directional antenna for my situation? I would like to keep it fairly inexpensive since I have already spent a good amount of money on an antenna that won't work for my situation. Thanks.
JeffKnob is offline   Reply With Quote
Old 4-Jan-2012, 8:34 PM   #22
No static at all
Senior Member
 
No static at all's Avatar
 
Join Date: Apr 2010
Location: Chantilly, VA
Posts: 547
Very Good

Better

Best
No static at all is offline   Reply With Quote
Old 4-Jan-2012, 8:41 PM   #23
JeffKnob
Junior Member
 
Join Date: Nov 2011
Posts: 11
Quote:
Originally Posted by No static at all View Post
Thanks but those are VHF only. I would need it to do VHF and UHF like my currently setup only more directional.
JeffKnob is offline   Reply With Quote
Old 4-Jan-2012, 8:56 PM   #24
No static at all
Senior Member
 
No static at all's Avatar
 
Join Date: Apr 2010
Location: Chantilly, VA
Posts: 547
Oops, my bad

Smallest moderately directional combo

Small moderately directional combo
No static at all is offline   Reply With Quote
Old 7-Jan-2012, 9:35 PM   #25
JeffKnob
Junior Member
 
Join Date: Nov 2011
Posts: 11
I picked up the Antennacraft HBU33 from my local Radio Shack and installed it today. My CBS station (WFRV) is now just as bad if not worse than in was. I am also getting a weaker signal overall across all channels. The HBU33 is going back to the store. I am getting very frustrated.
JeffKnob is offline   Reply With Quote
Old 8-Jan-2012, 4:58 AM   #26
MisterMe
Senior Member
 
Join Date: Aug 2011
Location: USA Gulf South
Posts: 231
Your problem is not lack of signal. It is also not your HBU33 antenna. Perhaps you should make a direct connection between the antenna balun to a single TV set to test your signal strength on each channel. Then put your distribution amplifier inline and repeat the test with the single TV. This test will determine whether or not your distribution amplifier is working correctly. Make sure that the amplifier is powered. You may also place terminators on the unused ports during the test.
MisterMe is offline   Reply With Quote
Old 8-Jan-2012, 5:11 AM   #27
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
Quote:
Originally Posted by JeffKnob View Post
I picked up the Antennacraft HBU33 from my local Radio Shack and installed it today. My CBS station (WFRV) is now just as bad if not worse than in was. I am also getting a weaker signal overall across all channels. The HBU33 is going back to the store. I am getting very frustrated.
Very frustrating indeed.

I've had tough trouble cases on several occasions. In several situations, I made progress after I decided to start over mentally, throw out all my conclusions and re-prove what I thought I knew for sure.

Each cable and connector, every part of the system should be suspect at this point. I agree w/ MrMe, simplify the system so that you can prove you have reliable signal at the antenna. If not, look for a new mounting location or an antenna that produces a reliable signal. Then, add complexity to the system.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 9-Jan-2012 at 4:48 AM.
GroundUrMast is offline   Reply With Quote
Old 9-Jan-2012, 3:27 AM   #28
Electron
Senior Member
 
Join Date: Nov 2011
Posts: 1,832
Tv antennas and Tv reception

Install a Winegard HD7698P antenna above the roof. Aim the HD7698P antenna at about 66 degree magnetic compass. Here is how to aim antennas , http://www.kyes.com/antenna/pointing/pointing.html. . Here are some roof mounts , http://www.ronard.com/9009911.html , http://www.ronard.com/34424560.html , http://www.ronard.com/ychim.html. With this antenna a preamplifier will not be needed. The antenna collects a lot of signal / signal strength to the tv. And the antenna does a very good job of rejecting multipath/reflected signals that can interfer with reception. . Here are places to buy antennas and etc. , http://www.winegarddirect.com , http://www.solidsignal.com , http://www.amazon.com
Electron is offline   Reply With Quote
Old 9-Jan-2012, 3:31 AM   #29
Electron
Senior Member
 
Join Date: Nov 2011
Posts: 1,832
Tv antennas and Tv reception

A way to prove out the reception is to connect a known to be good RG-6 coax cable DIRECT from the antenna to the tv. Run the RG-6 coax from the antenna through a open door or window DIRECT to the tv.
Electron is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 8:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC