|
17-May-2011, 1:03 PM
|
#1
|
Junior Member
Join Date: Nov 2010
Location: Nashua, NH
Posts: 26
|
Rg6 cable connectors-what kind?
What are the best type of RG6 Cable connectors to use in your opinions? I see they have compression one's and saw a video on them, then they have the gool old crimp style, for which I have a tool for that, thought I have heard they do not make great connections. Is that true, or is it all in the way one goes about installing them? Thanks
Last edited by siriusxmfan; 17-May-2011 at 1:03 PM.
Reason: spelling error
|
|
|
17-May-2011, 1:49 PM
|
#2
|
Moderator
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
|
Double shielded RG-6 and compression connectors.
Quad-shield is not needed for OTA frequencies. RG-59 has too much loss. Crimp connectors are inferior in several ways, mechanically and electrically.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)
(Please direct account activation inquiries to 'admin')
|
|
|
17-May-2011, 2:27 PM
|
#3
|
Senior Member
Join Date: Dec 2009
Location: Delmar, NY
Posts: 1,236
|
Quote:
Originally Posted by siriusxmfan
They have the gool old crimp style, for which I have a tool for that, thought I have heard they do not make great connections.
|
I think that crimp style F connectors make excellent connections. Once you have the tool there's no reason to change.
|
|
|
17-May-2011, 3:29 PM
|
#4
|
Junior Member
Join Date: Nov 2010
Location: Nashua, NH
Posts: 26
|
As for the compression connectors, What brand of compression tool is a good one, The one I saw on youtube that they used cost $75-$80.00!! I then saw one made by klien(A very reliable company, I have some of their tools) and that was at the home depot, it was around $37.00 As for the crimp connectors, do they fall apart easily? Not connect tight enough?
|
|
|
17-May-2011, 4:28 PM
|
#5
|
Moderator
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
|
Quote:
Originally Posted by Tower Guy
I think that crimp style F connectors make excellent connections. Once you have the tool there's no reason to change.
|
Hard to argue with... so long as the existing tools are not over or under crimping.
Some time ago, I replaced my personal crimping tool with a kit by DataShark. Amazon and the home improvement centers carry these. http://www.amazon.com/DataShark-7001.../ref=pd_cp_e_1
I have not found a compression connector that I would caution against. Several brands have all functioned perfectly in my compression tool.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)
(Please direct account activation inquiries to 'admin')
|
|
|
17-May-2011, 7:41 PM
|
#6
|
Member
Join Date: Dec 2010
Posts: 65
|
Harbor Freight sells a nice inexpensive compression fitting crimper but thats all it does. You will need a separate tool for cutting and prepping the RG6 cable.
I am not a big fan of harbor freight's compression fittings, so I use the more expensive Greenlee brand.
|
|
|
17-May-2011, 8:43 PM
|
#7
|
Senior Member
Join Date: Jun 2010
Posts: 2,697
|
Tv Antennas and Reception
LOWES home improvement store has the IDEAL line of compression tools and fittings , http://www.idealindustries.com . The LOWES stores that I go into have , cable , data com , electrical , displayed in a clear clean and easy to find manner. Not like home depot that has every thing jammed and stacked on the shelves. The compression fittings are the best to use.
|
|
|
17-May-2011, 10:30 PM
|
#8
|
Junior Member
Join Date: Nov 2010
Location: Nashua, NH
Posts: 26
|
Well, I am going to go with the Compression connectors for sure, now will check out the tools, Thanks, you guys have given me a great bunch of advice and direction to go in. Will post on how I do, Thanks again, Pat
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|