PDA

View Full Version : Starting From Scratch


Marken88
19-Aug-2012, 10:16 PM
http://www.tvfool.com/?option=com_wrapper&Itemid=29&q=id%3d99003cc6709198

After 6 years, we're dumping Dish. Need to go OTA and we will need everything.
Antenna would be about 20-25' on a pole outside.

Interested in the Green Bay area channels which are about 40 miles NE of us.

Any suggestions to get us going would be appreciated.

Ken

teleview
20-Aug-2012, 1:39 AM
The tvfool report says resolved to street level only , can you make a report with exact address??

With the antenna at 25 feet height.

How many Tv's are/will be connected??

Marken88
20-Aug-2012, 1:47 AM
Thanks for the reply.

We live on a lake and I put in my address, and the report is what came up. How can I change it?

There will be 2 televisions hooked up.

teleview
20-Aug-2012, 4:50 AM
Go the tvfool home page.

Click on the >>Start MAPS<<.

Move the pointer to your location.

Make the antenna height 25 feet.

Make a tvfool radar plot map.

Marken88
20-Aug-2012, 4:08 PM
http://www.tvfool.com/?option=com_wrapper&Itemid=29&q=id%3d99005f0d88ef01

This is what came up after I hit make radar plot. Is this what your looking for?

Ken

teleview
20-Aug-2012, 8:17 PM
A Simple reception situation.

For reception of the Digital Tv stations/channel to the north east at about 30 degree magnetic compass direction.

Above the roof install a Winegard HD9095P antenna aimed at about 30 degree magnetic compass direction.

For 1 Tv connected use no splitter.

For 2 Tv's connected use a common simple 2 way splitter.

Here is how aim antennas , http://www.kyes.com/antenna/pointing/pointing.html.

Here are some above the roof antenna mounts , http://www.ronard.com/909911.html , http://www.ronard.com/34424560.html , http://www.ronard.com/ychim.html , http://www.ronard.com.

Buy the ronard antenna mounts at solidsignal by typing the word ronard in the solidsignal search box.

Here are some places to buy antennas and etc. , http://www.solidsignal.com , http://www.amazon.com , http://www.winegarddirect.com.

The Tv/s Must Channel Scan for the Digital Broadcast Tv Channels , sometimes named the 'Air Channels' or 'Antenna Channels' in the Tv setup menu because the Tv transmissions travel through the air from the transmitting antenna to the receiving antenna.

DO NOT channel scan for cable tv channels.


As always , tres and tree leaves do a real fine job of , reflecting , reducing , blocking , Tv reception and so do buildings and other obstructions.

It is best to locate the antenna at a location where there is the least amount to no amount of obstructions in the direction of reception.

Marken88
20-Aug-2012, 8:46 PM
Once again, thanks for the reply.

One question though.

I see this is a UHF only antenna. Our Fox channel, 11.1, is a VHF Hi channel.
Will it receive this channel also? Need my Nascar fix:rolleyes:



Ken

teleview
20-Aug-2012, 8:57 PM
You are correct.

Install a Winegard HD7696P antenna , not the HD9095P antenna.