TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 11-Jan-2016, 11:01 PM   #1
tasattack
Junior Member
 
Join Date: Jan 2016
Posts: 2
Odd Issue - NBC

Hey folks, first post on this site. I have an issue pulling in local ch 8.1, NBC. I live in the New Port Richey/Trinity, Florida area, North West of Tampa.

I have the ANTOP UHF-262 yagi antenna mounted on a mast above the house. I believe it is greater than 20-25 feet, if I have to guess. Below the antenna I have the channel master cm-7777. I am also using the Channel Master DVR+. I roughly have the antenna pointing to about 120 degrees. When I first erected this, I scanned and pulled in 58 channels. I believe I had the antenna pointing roughly 140 degrees. I pulled in NBC, CBS, FOX, ABC and about 54 other channels. CBS was fairly weak hence changing the antenna heading 20 degrees. CBS is quite strong however, the odd issue I am having is at first I had NBC and now I cant pull it in. From the report NBC and FOX are nearly the same heading about 2 degrees apart.

Ive had other antennas and just could not get FOX and CBS and only pulled 26 channels on a good day. I am just looking for some advice on how I might be able to pull in NBC. I feel like this setup is working better than my wineguard ms2002.

Antenna: https://www.parts-express.com/antop-...tenna--210-514

Preamp: http://www.amazon.com/gp/product/B00...ilpage_o08_s00

Analysis: http://www.tvfool.com/?option=com_wr...5134a5f53d2a48
tasattack is offline   Reply With Quote
Old 11-Jan-2016, 11:04 PM   #2
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Your antenna is a UHF-only design.

See if you can return it for the version that includes the VHF elements. It, at least, will give you a chance.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 11-Jan-2016, 11:18 PM   #3
tasattack
Junior Member
 
Join Date: Jan 2016
Posts: 2
Quote:
Originally Posted by ADTech View Post
Your antenna is a UHF-only design.

See if you can return it for the version that includes the VHF elements. It, at least, will give you a chance.
I thought that may have been the case but I wasn't sure since some other info I had looked at may have had misleading info. Ive had this antenna for over a year, its only been mounted outside for a week now.

I had my eye on this: https://www.parts-express.com/antop-...tenna--210-512
tasattack is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 7:43 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC