TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 2-Jul-2013, 3:01 PM   #1
tbone2866
Junior Member
 
Join Date: Oct 2010
Posts: 2
Antennae suggestions

Years ago I asked for help with finding and antennae for my area. Now that I have finally had it with Direct TV. I am once again asking for help. Is there an antennae out there that I can install in my attic? I want to avoid installing it outside on the roof as the wind out here is horrible. It was suggested here on my previous thread that i should put up two antennae's for different signals. Can this be avoided? If not, can I put the two in the attic? Thanks for all your help.

http://www.tvfool.com/?option=com_wr...0559ec8041a379
tbone2866 is offline   Reply With Quote
Old 2-Jul-2013, 7:10 PM   #2
teleview
Guest
 
Posts: n/a
Based on the tvfool report being resolved to the block level only , and the default 10 feet antenna height above ground.

Above the Peak Of The Roof in such a manner that the roof and house do not impede or block reception to the , north east , south west.

Install and aim a Winegard HD7698P antenna at about 76 degree magnetic compass direction , north east.

WWTO channel 10 to the south west , is strong signal strength and will be received through the back angle of the HD7698P antenna.

So only 1 HD7698P antenna is required for reception.

Here is how to aim antennas , http://www.kyes.com/antenna/pointing/pointing.html.

Here are some strong and sturdy above the roof antenna mounts.

http://www.ronard.com/909911.html. Use the 5 foot , ronard (911) , tripod antenna mount.

http://www.ronard.com/34424560.html. Use the , ronard (4560) , eave antenna mount.

http://www.ronard.com/ychim.html. Measure the chimney and use. ronard (2212) , or , ronard (2218) , or , ronard (2224) .

Buy the ronard antenna mounts at solidsignal by typing , ronard (x) in the the solidsignal search box or buy from ronard.

Here are some places to by antennas and etc. .

http://www.solidsignal.com.

http://www.amazon.com.

http://www.winegarddirect.com.

______________

Install a Winegard HDP-269 preamp.

______________

For 1 tv connected use No splitter.

For 2 Tv's connected use a , HFS-2D , 2 way splitter.

For 3 Tv's connected use a HFS-3D , 3 way splitter.

Buy the HFS splitters at , http://www.solidsignal.com or http://www.hollandelectronics.com.

______________________________________

Disconnect and Remove All passive and active satellite system componets such as and not limited to , multi-switches , multi-plexers , combiners , splitters , amplifiers , power injectors , powers supplies and etc. .

Yes the satellite system coaxes and other coaxes can be used for the Broadcast Tv antenna system.

Last edited by teleview; 4-Jul-2013 at 6:58 AM. Reason: Clarify information and typos.
  Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 5:34 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC