TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 23-Jan-2014, 2:03 AM   #1
Quimby
Junior Member
 
Join Date: Jan 2014
Posts: 2
Help with the RCA digital signal preamp

I bought a DB8e antenna and got it mounted. I also ordered the RCA digital preamp but can't figure out for the life of me how it is to be wired to the antenna.

Do I bypass the splitter that is in the black box that came with the antenna and go into the preamp only?

The two ports that I would connect into from the antenna on the preamp have a vhf/uhf separate/common switch. I assume I choose common, but not sure. The directions don't seem to address 1 antenna with 2 cables.

Hope that makes sense, obviously I am new to this and learning as I go.

Thank you.
Quimby is offline   Reply With Quote
Old 23-Jan-2014, 2:36 AM   #2
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Pretend the output of the combiner box is the output of a simple antenna....

It's that easy.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 10:22 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC