TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 10-Jul-2021, 4:21 PM   #1
ssharnick
Junior Member
 
Join Date: Nov 2014
Posts: 22
Question VHF station

Hi all. I’m still researching an antenna(s) for when I move to my new condo next month. I’m considering the Televus Datboss LR mix UHF/VHF antenna to install in an attic(HOA, and yes, I am aware of the law, just don’t want to start crap as soon as I move in).
My question is do you think if I point the antenna toward the UHF towers I want to receive (WFSB, WVIT...) will the VHF elements pick up the VHF station (WTNH) that I want from the side. The location is below.

Thank you for any input.

Shawn

http://www.tvfool.com/?option=com_wr...9038b22ad35481
ssharnick is offline   Reply With Quote
Old 10-Jul-2021, 6:53 PM   #2
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
Quote:
Originally Posted by ssharnick View Post
My question is do you think if I point the antenna toward the UHF towers I want to receive (WFSB, WVIT...) will the VHF elements pick up the VHF station (WTNH) that I want from the side. The location is below.
Hello, Shawn.

That's difficult to predict. WTNH will be in a null, making it a lot weaker, when the antenna is aimed at WFSB, but it will help that WTNH is much stronger.

You might have some multipath reflections that will interfere with the reception of WTNH when the antenna is not aimed at WTNH.

You will just have to try it.

https://www.rabbitears.info/searchma...tudy_id=242706



If it doesn't work, you will need to use separate UHF and VHF antennas combined with a UVSJ.
Attached Images
File Type: jpg Televes DAT BOSS MIX LR VHF-High Pattern_1.jpg (103.1 KB, 1661 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 10-Jul-2021 at 7:04 PM.
rabbit73 is offline   Reply With Quote
Old 10-Jul-2021, 7:10 PM   #3
ssharnick
Junior Member
 
Join Date: Nov 2014
Posts: 22
Thank you Rabbit. My original plan was to go with 2 antennas, a bow tie and a VHF for WTNH, then I saw a review on this Televes and it sparked my interest. I think I'm probably going to go with my original plan. Have a great rest of your weekend.
ssharnick is offline   Reply With Quote
Old 1-Aug-2021, 5:25 PM   #4
ssharnick
Junior Member
 
Join Date: Nov 2014
Posts: 22
Quote:
Originally Posted by rabbit73 View Post
Hello, Shawn.

That's difficult to predict. WTNH will be in a null, making it a lot weaker, when the antenna is aimed at WFSB, but it will help that WTNH is much stronger.

You might have some multipath reflections that will interfere with the reception of WTNH when the antenna is not aimed at WTNH.

You will just have to try it.

https://www.rabbitears.info/searchma...tudy_id=242706



If it doesn't work, you will need to use separate UHF and VHF antennas combined with a UVSJ.
Hi Rabbit. Our move in date is rapidly approaching so am trying to finalize this decision on which antenna(s) to buy, so on this topic, what are your thoughts about this monster, the Extreme Signal HD8200XL? If I were to point the UHF elements and reflectors toward the WFSB towers, do you think the very long VHF elements pick up WTNH or would those elements be directional too?
ssharnick is offline   Reply With Quote
Old 2-Aug-2021, 1:14 AM   #5
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
Quote:
Originally Posted by ssharnick View Post
Hi Rabbit. Our move in date is rapidly approaching so am trying to finalize this decision on which antenna(s) to buy, so on this topic, what are your thoughts about this monster, the Extreme Signal HD8200XL? If I were to point the UHF elements and reflectors toward the WFSB towers, do you think the very long VHF elements pick up WTNH or would those elements be directional too?
That antenna is much larger than necessary for your location. It covers UHF, VHF-High, and VHF-Low. The VHF-Low elements are 110" wide. You don't have any VHF-Low channels (Real RF channels 2-6).
https://www.solidsignal.com/Manuals/HD8200XL_Specs.pdf

Attached Images
File Type: png ssharnickTVFreportNewLocRE_1.png (247.4 KB, 1548 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 2-Aug-2021 at 1:37 AM.
rabbit73 is offline   Reply With Quote
Reply

Bookmarks

Tags
direction, from the side, uhf/vhf

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 1:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC