TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 8-Oct-2013, 2:52 PM   #1
tally
Junior Member
 
Join Date: Sep 2010
Posts: 16
Antenna Recommendation Down a Hill....

This is my father's home.

Here is my report:

http://www.tvfool.com/?option=com_wr...46ae6632c33afc

This property is located down in a bowel / down hill. The antenna needs to pick-up channels to the northwest. The antenna can be located on the roof at about 25 feet but it will not have a clear shot to the stations if that makes sense - i.e. it will be pointed against a gradual hill that is used to get down to the property.

I need to service two TV's. Cables runs are from roof (antenna location) to splitter location in basement - approx 30 feet. From splitter to TV1 - 18 feet. From splitter to TV2 - 25 feet.

Please recommend an antenna, boosters, etc.

Thank you.
tally is offline   Reply With Quote
Old 8-Oct-2013, 3:05 PM   #2
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
At least you have the advantage of all available signals lay on the same azimuth. I'd use a Winegard HD7698P and an Antennas Direct PA-18 preamplifier.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')
GroundUrMast is offline   Reply With Quote
Old 8-Oct-2013, 3:54 PM   #3
tally
Junior Member
 
Join Date: Sep 2010
Posts: 16
I presume the PA-18 needs to be located up by the antenna. With that said, I have a couple of RG-6 runs on the roof. I will be using one of those for the antenna. The location to power the PA-18 is about 30 feet away as well (the other RG-6 run). What I am asking is can I power the PA-18 from one of the 30 foot cable runs? I have no way to get power close to the antenna location. Also, can I use a regular splitter at the splitter location (also 30 feet away from the antenna) to get to the two TV locations versus an amp/powered splitter.

Thank you.
tally is offline   Reply With Quote
Old 8-Oct-2013, 5:26 PM   #4
Tower Guy
Senior Member
 
Join Date: Dec 2009
Location: Delmar, NY
Posts: 1,236
Use a single port power pass splitter such as a Blonder Tongue CRSP-2.
Tower Guy is offline   Reply With Quote
Old 9-Oct-2013, 3:42 AM   #5
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
Antennas Direct also offers power passing splitters: http://www.antennasdirect.com/store/splitters.html

The PA-18, like virtually all preamplifiers is powered by low voltage inserted into the coax. The power supply and power insertion block are intended to be indoors. You will need to have an extremely long cable run to before you need to worry about voltage drop.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')
GroundUrMast is offline   Reply With Quote
Old 9-Oct-2013, 10:41 AM   #6
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Connection example:

http://www.antennasdirect.com/cmss_f...itter_Opt2.pdf
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 9-Oct-2013, 7:45 PM   #7
teleview
Guest
 
Posts: n/a
Aim the antenna at about 320 degree magnetic compass direction.

Here is how to aim antennas , http://www.kyes.com/antenna/pointing/pointing.html.

Use a Real and Actual magnetic compass to aim antenna.

______
  Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 7:50 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC