TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 5-Oct-2017, 2:46 AM   #21
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
I refreshed the link

http://www.tvfool.com/?option=com_wr...e6a44ae36c6631

There is a chance that after the repack
KNTV 11.1 (RF12) on Mt. San Bruno will move to
RF 13.

http://www.avsforum.com/forum/45-loc...a-ota-499.html
ckwsp101_tv is offline   Reply With Quote
Old 5-Oct-2017, 3:11 AM   #22
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,750
Thanks for refreshing the link, but that doesn't work. It has been deleted from the tvfool server because it is out of date. It will be necessary to do a new report.

post 1, last part of link:
3de6a44ae36c6631
post 21, last part of link:
3de6a44ae36c6631

It's the same report.

This is the 50 ft report in post 9 that says "The requested report ID is no longer on our server. To start a new analysis, click here."
http://www.tvfool.com/?option=com_wr...f1f02b36a29948
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 5-Oct-2017 at 3:18 AM.
rabbit73 is offline   Reply With Quote
Old 5-Oct-2017, 3:19 AM   #23
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
Browser cut and paste issue

http://www.tvfool.com/?option=com_wr...e6a4535ed606db
ckwsp101_tv is offline   Reply With Quote
Old 5-Oct-2017, 3:24 AM   #24
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,750
Quote:
There is a chance that after the repack
KNTV 11.1 (RF12) on Mt. San Bruno will move to
RF 13.
That seems to be true:

http://www.rabbitears.info/market.ph...&callsign=kntv
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html
rabbit73 is offline   Reply With Quote
Old 5-Oct-2017, 3:30 AM   #25
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,750
Thank you for the new report link; it works fine.

I will study your report, but I'm not sure that I can add anything useful other than it's the terrain and the tree.

Have you asked for help on the AVS SF local reception thread that you linked?
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 5-Oct-2017 at 3:52 AM.
rabbit73 is offline   Reply With Quote
Old 5-Oct-2017, 4:08 AM   #26
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
Thank you for responding.

I think vertical stacked VHF balun polarity was correct.
The SiliconDust tuner diagnostic reports 10% quality improvement
over single VHF antenna
I can view KNTV (RF 12) when signal quality is above 55%. There is more
variation in recent months. Symbol quality sometimes goes to zero. Multipath
issues continue.

I agree it is likely the terrain and tree.

I will first try replacing baluns.


Will check out the AVS forum.
ckwsp101_tv is offline   Reply With Quote
Old 5-Oct-2017, 12:06 PM   #27
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Quote:
There is a chance that after the repack
KNTV 11.1 (RF12) on Mt. San Bruno will move to
RF 13.
A chance? No, a certainty.

KNTV has been assigned RF13, KGO will be moved to RF 12, and KRON wll be moved to RF 7 as part of the repack process. All moves are scheduled for the spring of '20 for the Bay area.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 5-Oct-2017, 10:34 PM   #28
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
Here is current antenna location on tripod.



I guess growing trees degrading VHF reception.
Will try to trim tree limbs on my property.
Attached Images
File Type: png antennatreessmall.png (232.2 KB, 2701 views)
ckwsp101_tv is offline   Reply With Quote
Old 6-Oct-2017, 3:03 AM   #29
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,750
Thanks for the oblique satellite photo; it helps.

Here is the KNTV terrain profile:



Is the antenna here (I used the vertical instead of the oblique):



or here:





Is the antenna at the teardrop or at A.

Are B and C solar panels? Thermal or PV?

Do you have an inverter? They can cause interference on VHF.

What is D?
Attached Images
File Type: jpg ckwsp101_tvTVFp2KNTV.JPG (106.0 KB, 2708 views)
File Type: jpg ckwsp101_tvTVFgrnLines.JPG (118.5 KB, 2727 views)
File Type: jpg ckwsp101_tvTVFgrnLines3.jpg (106.7 KB, 2744 views)
File Type: jpg ckwsp101_tvTVFroof.JPG (74.8 KB, 2702 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 6-Oct-2017 at 3:14 AM.
rabbit73 is offline   Reply With Quote
Old 6-Oct-2017, 5:17 PM   #30
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
Antennas placed at the tear drop.
At this position UHF channel reception is fine.
VHF RF 12 gradually degraded over the last 6 months.
I can view alternate KNTV NBC 11.3 on RF 49 from Mt Allison San Jose.


B and C are open areas.
D is over the roof copper water pipe repair done 10 years ago.


Nearby houses do have roof solar systems. I would expect panel interference
to be greater during the day and less during the night. I will take more measurements
using the SiliconDust diagnostic program.

I'm suppose it could be other interference.
The residential development has underground power distribution from the 60s.
The county is slowly converting to LED intersection lights.That was done 2 years ago
Could I use AM radio as a interference detector?

My SiliconDust tuner is 2 years old. Maybe the power supply is failing and weak station
reception is first symptom of pending failure.


To do list:

Replace baluns and check connections before rainy season.
Replace SiliconDust tuner wall wart power supply.

If simple measures do not improve situation I may just bail on RF 12. Depend
on RF 49 for NBC network content.
ckwsp101_tv is offline   Reply With Quote
Old 6-Oct-2017, 8:10 PM   #31
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
An old SiliconDust forum posting suggests noise in pre-amp or powered splitters
could lower signal quality. I'm going to assume the RCA pre-amp is working ok.
If all other measures fail then re exam issue raised in the SiliconDust posting.
If RCA premap really needs replacment maybe upgrade to the AD Juice pre-amp.

https://forum.silicondust.com/forum/...&t=4474#p25503

Quote:
Splitters and amplifiers can introduce noise which will lower the Signal Quality, even if the Signal Strength increases.
ckwsp101_tv is offline   Reply With Quote
Old 6-Oct-2017, 9:11 PM   #32
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,750
Thanks for the details.
Quote:
Antennas placed at the tear drop.
At this position UHF channel reception is fine.
Looks like the signal path is between two trees.
Quote:
VHF RF 12 gradually degraded over the last 6 months.
Tree growth?
Quote:
Could I use AM radio as a interference detector?
Yes, interference that is heard on the AM broadcast band is often strong enough to affect VHF-High TV reception. A battery operated portable can be used as a direction finder; its built-in loop antenna is directional. Tune to a clear spot at the low 550 end and then at the high 1600 end.

The last case I helped with was detected on an AM radio in a car as it drove in a road with the power line along side. The source of the interference was a battery charger affecting VHF-High. Other cases involved LED lights, and switchmode AC to DC power adapters for laptops.

Some of the sources of interference are constant; others time related.
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 6-Oct-2017 at 9:20 PM.
rabbit73 is offline   Reply With Quote
Old 4-Oct-2019, 12:58 AM   #33
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
Long time no post.

https://www.rabbitears.info/searchma...study_id=16913

http://www.tvfool.com/?option=com_wr...9038b74b56328c

Attempted to trim tree branches on my property.
No improvement on RF 12 reception.

I was able to get KNTV content from alternative RF 49 transmitter.
So I did not do much until this summer.

RF 7 and RF 12 signal quality continued to degrade.

Replaced baluns twice on the 2 stacked y10-7-13s resulted in improvement on RF 7.
Still no lock on RF 12.
Silicondust needs signal quality of 50% or better to lock.

HDhomeRun Config
RF 12
ss 75%
sq 43%

As experiment I converted my vertically stacked Y10-7-13 to a horizontal layout using saw horse next to
antenna mount.
Trial and error horizontal distance between the antennas.


11.1 (RF 12) finally locks with horizontal layout.
Silicon Dust
ss 81%
sq 60%

RF 7
ss 98%
sq 85%

RF 12 right at digital cliff.
Over time the best spot on roof for RF 12 changed. I may need a separate location and mount for RF 12 longer term :<

Quality of retail baluns not very good. Maybe I need to make home made versions for y10-7-13 array.
So far RCA pre-amp still working. If I need to replace I will consider combining UHF and VHF feeds and use Antennas Direct Juice pre-amp.

Found on Silicondust forum

Code:
SS%  dBmV
0%   -60 dBmV
5%   -57 dBmV
10%  -54 dBmV
15%  -51 dBmV
20%  -48 dBmV
25%  -45 dBmV
30%  -42 dBmV
35%  -39 dBmV
40%  -36 dBmV
45%  -33 dBmV
50%  -30 dBmV
55%  -27 dBmV
60%  -24 dBmV
65%  -21 dBmV
70%  -18 dBmV
75%  -15 dBmV
80%  -12 dBmV
85%   -9 dBmV
90%   -6 dBmV
95%   -3 dBmV
100%   0 dBmV

Last edited by ckwsp101_tv; 6-Oct-2019 at 5:11 PM. Reason: update tvfool link
ckwsp101_tv is offline   Reply With Quote
Old 12-Oct-2019, 12:32 AM   #34
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
KGO RF 7 switching to auxiliary antenna lower down on tower 24/7 until repack completes 5/1/2020.

Both hi VHF RF 7 and 12 marginal.

Too bad KGO RF 7 was my ABC station.

https://www.avsforum.com/forum/45-lo...l#post58670562
ckwsp101_tv is offline   Reply With Quote
Old 23-Oct-2019, 1:03 AM   #35
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,750
Thank you for the new reports.
Quote:
Attempted to trim tree branches on my property.
No improvement on RF 12 reception.

Replaced baluns twice on the 2 stacked y10-7-13s resulted in improvement on RF 7.
Still no lock on RF 12.
Silicondust needs signal quality of 50% or better to lock.

HDhomeRun Config
RF 12
ss 75%
sq 43%

As experiment I converted my vertically stacked Y10-7-13 to a horizontal layout using saw horse next to
antenna mount.
Trial and error horizontal distance between the antennas.

11.1 (RF 12) finally locks with horizontal layout.
Silicon Dust
ss 81%
sq 60%

RF 12 right at digital cliff.
Over time the best spot on roof for RF 12 changed. I may need a separate location and mount for RF 12 longer term :<
Considerable improvement with horizontal array, but you are still behind a hill.



Quote:
Found on Silicondust forum

Code:
SS%  dBmV
0%   -60 dBmV
5%   -57 dBmV
10%  -54 dBmV
15%  -51 dBmV
20%  -48 dBmV
25%  -45 dBmV
30%  -42 dBmV
35%  -39 dBmV
40%  -36 dBmV
45%  -33 dBmV
50%  -30 dBmV
55%  -27 dBmV
60%  -24 dBmV
65%  -21 dBmV
70%  -18 dBmV
75%  -15 dBmV
80%  -12 dBmV
85%   -9 dBmV
90%   -6 dBmV
95%   -3 dBmV
100%   0 dBmV
Thank you for the useful conversion chart. Just for fun, I have added dBm values in a Sandbox post.
https://forum.tvfool.com/showthread....2341#post62341
Attached Images
File Type: jpg ckwsp101_tvTVFp3KNTV.JPG (38.8 KB, 2251 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 23-Oct-2019 at 1:23 AM.
rabbit73 is offline   Reply With Quote
Old 24-Oct-2019, 4:45 AM   #36
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
Quote:
Originally Posted by rabbit73 View Post

Considerable improvement with horizontal array, but you are still behind a hill.



Very true.

I did not realize magnitude of RF 12 multi-path interference at my location.
The horizontal array is a big win.

Reception fine most of the time.
Signal Quality stable. Fewer jumps/jitters

Likely reception will change again after 5/1/2020 repack completes.
ckwsp101_tv is offline   Reply With Quote
Old 24-Oct-2019, 8:51 PM   #37
jrgagne99
Senior Member
 
Join Date: Sep 2016
Posts: 244
Just curious, what value did you end up with for horizontal spacing? What was the value you were did vertical stacking?

Do you think the values would be good for stacking Stellar Labs 30-2476, which I believe has a similar configuration as the Y-10-7-13's ?
jrgagne99 is offline   Reply With Quote
Old 25-Oct-2019, 12:14 AM   #38
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
Quote:
Originally Posted by jrgagne99 View Post
Just curious, what value did you end up with for horizontal spacing? What was the value you were did vertical stacking?

Do you think the values would be good for stacking Stellar Labs 30-2476, which I believe has a similar configuration as the Y-10-7-13's ?
My current horizontal distance is 100 inches.
I need longer feed lines to increase distance.

I did not find a best vertical stacking distance as i had limited space on mast.
i used 30 inches.

I used Silicondust signal quality measurement to confirm distances doing right thing.

My situation atypical. Likely I will need another mount and location to place 2nd y10-7-13 longer term. Right now using saw house mount.
ckwsp101_tv is offline   Reply With Quote
Old 4-May-2020, 12:33 AM   #39
ckwsp101_tv
Member
 
Join Date: Feb 2015
Posts: 39
Bay Area Phase 9 repack done.

https://www.rabbitears.info/searchma...study_id=16913

Rescan and now KNTV on RF 13.
Better viewing experience.
Transmitting antenna higher on tower and higher power.


SiliconDust
RF 13
Signal Strength 92%
Signal Quality 83-90%

Signal Quality still bouncy.

I need to investigate UHF channel reception.
After repack some UHF stations now have issues.

KBCW 44 was on RF 45 after repack on RF 28.

SiliconDust tuner reports lower Signal Quality for KBCW 44 RF 28.

RF 28
Signal Strength 90%
Signal Quality 67-76%
Symbol Quality 0-100%

RF 27
Signal Strength 92%
Signal Quality 85%
Symbol Quality 100%

RF 33
Signal Strength 99%
Signal Quality 90%
Symbol Quality 100%


Guess I am at digital cliff for reliable reception of KBCW 44 RF 28.
Signal Quality bouncy.
Now multi-path issues?
Impairments specific to RF28 as RF27 reception better.
KKPX-TV RF 33 also better.
Antennas Direct 91XG gain on RF 28 lower than RF 45.

Most of time recorded shows on KBCW RF28 viewable with some breakup.
Maybe take further action after exiting lockdown.

Last edited by ckwsp101_tv; 4-May-2020 at 3:49 PM. Reason: add rabbitears.info
ckwsp101_tv is offline   Reply With Quote
Old 15-May-2020, 6:07 PM   #40
bobsgarage
Antenna Enthusiast
 
bobsgarage's Avatar
 
Join Date: Mar 2016
Location: Beach Park IL
Posts: 318
Thanks for the follow up

Quote:
Originally Posted by ckwsp101_tv View Post
Bay Area Phase 9 repack done.

https://www.rabbitears.info/searchma...study_id=16913

Rescan and now KNTV on RF 13.
Better viewing experience.
Transmitting antenna higher on tower and higher power.


SiliconDust
RF 13
Signal Strength 92%
Signal Quality 83-90%

Signal Quality still bouncy.

I need to investigate UHF channel reception.
After repack some UHF stations now have issues.

KBCW 44 was on RF 45 after repack on RF 28.

SiliconDust tuner reports lower Signal Quality for KBCW 44 RF 28.

RF 28
Signal Strength 90%
Signal Quality 67-76%
Symbol Quality 0-100%

RF 27
Signal Strength 92%
Signal Quality 85%
Symbol Quality 100%

RF 33
Signal Strength 99%
Signal Quality 90%
Symbol Quality 100%


Guess I am at digital cliff for reliable reception of KBCW 44 RF 28.
Signal Quality bouncy.
Now multi-path issues?
Impairments specific to RF28 as RF27 reception better.
KKPX-TV RF 33 also better.
Antennas Direct 91XG gain on RF 28 lower than RF 45.

Most of time recorded shows on KBCW RF28 viewable with some breakup.
Maybe take further action after exiting lockdown.
Thanks for the follow up! Sounds like you benefitted from the re-pack, I'm worried about multi path here as it seems the Chicago market has all the stations packed together

Attached Images
File Type: jpg 95932435_1430624173811770_7737309456903438336_o.jpg (9.9 KB, 2051 views)
bobsgarage is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 12:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC