TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 15-Sep-2014, 2:50 PM   #1
ceastmen
Junior Member
 
Join Date: Aug 2014
Posts: 13
Combiner & Preamplifier questions

With a separate UHF and VHF antenna, would you use a UHF / VHF Antenna Combiner?

If so to run a Preamplifier with a UHF / VHF Antenna Combiner would it be before or after the Combiner?

Do the UHF and VHF antennas require separate Preamplifiers?

Thanks in advance,
Charles
ceastmen is offline   Reply With Quote
Old 15-Sep-2014, 2:58 PM   #2
ceastmen
Junior Member
 
Join Date: Aug 2014
Posts: 13
TVFool report

Should have included this along with my post.
http://www.tvfool.com/?option=com_wr...d2432b8c9f7c44

Thanks,
Charles
ceastmen is offline   Reply With Quote
Old 15-Sep-2014, 4:06 PM   #3
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
It depends on what you need to achieve. Please provide details.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 16-Sep-2014, 3:20 AM   #4
ceastmen
Junior Member
 
Join Date: Aug 2014
Posts: 13
I believe from what I've read on this site that I need to have 2 separate antennas, one for UHF (@ 191deg. magnetic) and one VHF (@167deg. magnetic), from my TVFool report.
Everything else is very low power and 2Edge.

I'm asking what is the cleanest way to setup the antennas, assuming I need to use a preamplifier for one or both antennas. Will a UHF/VHF combiner simplify the number of coax cables I need to use?
ceastmen is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 11:59 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC