View Single Post
Old 13-Nov-2014, 3:18 PM   #10
Antennas Direct Tech Supp
Join Date: Jan 2010
Posts: 2,942
For an inexpensive ch 13 attenuator, get one of these: Put a terminator on the ch 13 input and run the signal trough the Jointenna.

You also have a very strong UHF 14 coming in off the back of the antenna. If you can find one, a Channel Plus NF-469 will cool it off a lot.

The gain control on that amp is irrelevant. It's only for the active return path which is not used in an OTA application. It's actually a drop or distribution amp intended for cable TV applications, it's not a preamp.
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote