View Single Post
Old 19-May-2014, 6:18 PM   #13
Antennas Direct Tech Supp
Join Date: Jan 2010
Posts: 2,942
screw on coax fittings be a possible cause?
Yes, if an error was made. Commonly, a strand of the shield gets shorted to the center. Perform a very careful inspection looking for that along with improper stinger length.

A splitter is a splitter whether it be cable or antenna signal?
If it's actually a splitter and not a diplexer (reverse channel) or some type of filter.

Best thing to do if nothing shows up from an inspection, is to simply use a known good length of cable and jump around each suspect leg of the cabling until you find the one causing the signal loss.
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote