|
As suggested in another thread I was reading I did the double rescan. Disconnected the antenna and the power from tv, then plugged tv back in and scanned, as was stated I got no channels. Then I plugged the antenna in and scanned again with my new setup, still nothing. So I took the tv to the basement and did the double rescan again, this time from before the splitter, no channels at all. I did it a third time and unplugged the power to the preamp, still nothing, not even the channels I got before.
Question; In order to bypass the preamp, is it sufficient to just unplug the power or will I have to get up to the antenna and move the cable from the output of the preamp directly into the antenna
al
|