12-Mar-2020, 7:39 PM
|
#6
|
Antenna Enthusiast
Join Date: Mar 2016
Location: Beach Park IL
Posts: 318
|
Rotators- Back at it
Quote:
Originally Posted by ADTech
For a large array, an entry level "ham" rotor would be strongly recommended. Anything less is going to have a short lifespan as you've already encountered.
They aren't cheap, though. Starting price would be around $250-300 for a rebuilt unit.
|
What Rotators are recommended these days?
Well, I have been off this site for a while, a lot has happened. Today is my first day back on this site in 3 months I think.
It's time to get back up to my array and fix what needs fixing. I just purchased a 20 foot stepladder. It is a MONSTER. I was able to use an 18 footer to set up my system so I should be OK, providing I get an able bodied helper (or two) to help set up the 20' monster.
So, my rotator. 2 ChannelMaster CM9510As have gone bad. So I am writing them off, even though they have a new version the CM9510HD. I agree my system may have too much turning torque, but my patented dual bearing system takes the vertical weight out of the system.
I can actually take the rotator off the main mast and the antenna mast stays in place.
So I see there is a coupla Alliance U-100 models, new, used and rebuilt out there for $60-$175, are they any good? I mean are they heavy duty for
a 2-3 antenna mast? They claim it's good for HAM antennas. I saw a You tube video and the controllers are loud as hell. That shouldn't matter too much I guess.
Then there's the Yaesu 450 that's about $300.
I really like my CM9510 because of the remote. Is the CM9510HD any good?
I would like to hear some opinions.
|
|
|