View Single Post
Old 20-Jun-2016, 2:27 PM   #13
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
Quote:
Would I be grounding both mast and coax properly if I came off the mast with #10 ground wire and joined it to the coax ground on the grounding block? The grounding block then grounded to the house ground via #10 solid core wire...
I think you are covered with that method, but as ADTech stated, the local AHJ might say NOT. Electricians in my area say that some inspectors (AHJs) can be arbitrary and unreasonable, but their interpretation is the law and must be followed, or the work will not be approved.
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html
rabbit73 is offline   Reply With Quote