View Single Post
Old 29-Jun-2017, 12:07 PM   #1
seeyabarney
Junior Member
 
Join Date: Nov 2015
Location: PA
Posts: 8
Combining two systems to one

I installed two stacked Televes (one UHF, one VHF) antennas that are pointing SE to get 7 stations that are 32 - 60 miles away. I am using a Televes 2-input combiner/amplifier. I also installed 2 stacked identical UHF/VHF Mediasonic antennas that are pointing NE and are receiving 6 stations from 75 miles away. I am just using an RCA preamp on this one. I want to combine these antennas to get all the stations since there is no rotor. I tried to use a 3-input Televes combiner/amplifier but did not work since it doesn't accept a UHF/VHF combo antenna in the 3rd input slot. I am amazed at the reception of both of these antennas since I live in a valley between two mountains. My zip is 17812. These antennas are installed on my wood shop roof about 15-20 feet high. Hopefully my photo comes through OK. Thank you for any advice you can give me.
Attached Images
File Type: jpg 20170629_064808.jpg (274.5 KB, 655 views)
seeyabarney is offline   Reply With Quote