View Single Post
Old 11-Oct-2019, 12:50 PM   #6
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
Quote:
Originally Posted by ADTech View Post
Disconnect the tuner in the BR and see if that resolves the issue with the set in the LR.
Good idea.
Quote:
I've read of several instances where a defective tuner radiated BACK out of it's coax port when the set was turned OFF. If the isolation between ports of the splitter isn't enough, that noise can cause reception loss if SNR isn't high enough.
That is possible; it's worth the test as suggested by ADTech:
Turned Off TV Sets Can Jam Signals
https://www.tvtechnology.com/opinion...an-jam-signals
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 11-Oct-2019 at 1:57 PM.
rabbit73 is offline   Reply With Quote