View Single Post
Old 17-Jul-2011, 10:04 PM   #7
sbikes
Junior Member
 
Join Date: Jul 2011
Posts: 7
OK, I finally got a free weekend to install our tv antenna, unfortunately it wasn't successful.
I went down to Fry's this morning because I was told they had the Winegard recommended above. They were out of it, and being a bit trigger happy I grabbed the channel master CM 4221HD.

I hooked it all up and some channels were scrambled at best then turned black and said "channel not available". I tried rotating the antenna around but the picture didn't get any better.

http://www.tvfool.com/?option=com_wr...e3b2812f747692

A note about the street report
We live in a new development so all i can get is a street level report (even when I enter our exact address).

our house is pre-wired for 6 rooms for satellite and digital tv. Since we only have one tv in our house I hooked the cable going to our family room directly to the antenna so it wasn't running through any spliters (just 2 "f" couplers).

Appreciate any feed back or thoughts on the situation
sbikes is offline   Reply With Quote