[togapete]

I decided to replace my attic cable run RG-6 with RG-6 Quad that had factory
ends in the closest precut size to my need ( 25'). I am happy to report a major improvment in the quality of all the channels. Even channel 2 is a little better
but it still pixilates freezes and blanks out at random time.

I found that if I aim the antenna toward Connecticut, I am able to get a stable wcbs channel signal. This was not possible during the past 2 weeks.


My next move is to replace the antenna run RG-6 with RG-6 Quad from the preamp on the antenna to the amp /splitter area about 40' feet away.

I'll post my results.

In closing ...I'd like to thank everyone for their suggestions.