View Single Post
Old 30-Aug-2016, 3:33 PM   #6
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,753
Your first five channels didn't change much. ION got stronger but it is in a different direction.

Your signals are strong enough that an attic location might work, but the signal loss in the attic is difficult to predict because of differences in construction. A metal roof, aluminum siding, aluminum thermal barrier, and stucco mesh will block signals. Try a temporary setup in the attic before drilling any holes.
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 30-Aug-2016 at 3:36 PM.
rabbit73 is offline   Reply With Quote