From the Kitztech website:
Remote Power - Coax Powered Version:
Quote:
The Remote Power - Coax Fed Version is designed to feed power from inside the house, via the coax, to a remote location where 120 volt power is not available.
This works great for basement, attic or mast mounting installations.
When mounting amplifier outside, it MUST be installed in a weatherproof enclosure (weatherproof enclosure not supplied).
|
http://www.kitztech.com/standard_coax.html
http://www.highdefforum.com/local-hd...tations-2.html
Quote:
|
I have the two-peice unit. I did have to construct a weatherproof enclosure for it.
|
post 19
http://www.avsforum.com/forum/25-hdt...l#post20479940
thread
Kitztech KT200 Coax Preamp Review
http://www.avsforum.com/forum/25-hdt...mp-review.html