Thread
:
VHF Challenges in San Diego
View Single Post
23-Jan-2016, 10:54 AM
#
17
rabbit73
Retired A/V Tech
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,753
Sorry, but the CM0707 is not an amp, it is a power supply for the original 7777 and 7778 preamps. More exactly, it is a power supply/power inserter.
http://www.solidsignal.com/pview.asp?p=cm0747
There is no amplifier shown in the circuit diagram, only a power supply and power inserter. The power inserter is in the upper right corner, consisting of inductor L and capacitor C2 which allow the power for the preamp and the TV signals to share the same coax line to the preamp mounted near the antenna.
Attached Images
0747inside2.jpg
(112.4 KB, 1923 views)
CM0747PSrev.jpg
(65.4 KB, 2741 views)
OrigCMpreamps.JPG
(44.5 KB, 1998 views)
CM0747label.jpg
(86.4 KB, 2271 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html
Last edited by rabbit73; 23-Jan-2016 at
11:32 AM
.
rabbit73
View Public Profile
Send a private message to rabbit73
Find More Posts by rabbit73