|
Ok, let me make another run at this with a bit more understanding and more clarity.
As my UHF and VHF antennas will be separated by necessity by about 20' I'll have to amp them individually. The UVSJ that I have is a Blonder Tongue and feeds power on the VHF side for reference.
So...
UHF #1 - KT-500 #1 - power inserter #1 - UVSJ "A" (High Side)
VHF #2 - (HLSJ in on High side - out on combined, terminate Low side) - KT-500 #2 - power inserter #2 - UVSJ "A" (Low Side), then the combined signal out of UVSJ "A" leads to TII Lightning Surge Protector w/ Ground Block feeding main incoming coax for viewing enjoyment.
Better?
|