|
Thank you for the detailed replies. Two questions...
I have a "subscriber amplifier" and a 1 to 8 distribution unit from the cable company. Marked as for 53 to 1000Mhz. Can I use that with these antennas to split my feed (at my office location in town)?
I'm also confused by one point. Am I correct in assuming the four main commercial stations broadcast both their 16 x 9 HD and 4 x 3 SD signals on the same channel or is it the cable station that down converts each HD signal to SD for their customers?
All four stations on Cox Cable come in both HD and SD on different QAM channels but I cannot find any mention of SD for OTA reception.
Last edited by byetocable; 1-Mar-2015 at 3:29 PM.
|