View Single Post
Old 26-Jun-2014, 11:37 AM   #9
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Quote:
The small problem is channel 5 (5.1, 5.2, 5.3) comes in but is glitchy. Is this more antenna adjustment
Yes, it's an adjustment issue. The antenna is currently is a location where that particular channel's signal is impaired, usually due to an odd reflection or the antenna's proximity to something metallic that detunes it for a particular channel.

Move the antenna (up, down, left, back, forward, backward) at least 6" increments and try again. Repeat until a satisfactory location is found, it may take multiple attempts so be patient. Do NOT drill any holes until you have found a satisfactory location.

You do NOT need an amp, you have ample signal power available.

WBBM is usually the "problem child" in Chicago as it's the only station on a VHF allocation and requires one to use an antenna with high-VHF elements as you have. VHF is also far more susceptible to interference from electrical or electronic noise sources or from other licensed signals, notably FM radio.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.

Last edited by ADTech; 26-Jun-2014 at 11:41 AM.
ADTech is offline   Reply With Quote