View Single Post
Old 6-Jun-2013, 9:28 PM   #9
teleview
Guest
 
Posts: n/a
Recommend Disconnect and Remove All parts of the preamplifier , remove the preamplifier , remove the preamplifier power injector , remove the preamplifier power supply.

2 amplifiers in the system is 2 , 2 many amplifiers.

Over amplified strong signals with a amplifier that will not tolerate strong signals.

Will overload the amplifier and produce all manner of reception problems on different channels even the weak signals.

______________________________________________________________
______________________________________________________________


I recommended the HD7698P antenna that has more gain for the weak Tv signals.

__________________________________________

The Cold Hard Truth is ,

Antenna Gain Is More Important then amplifier gain.

__________________________________________

And use the HDA-100 distribution amplifier that has very high tolerance for strong signals without overloading.

And the 6 way splitter.

With coax going out to each Tv location from the 6 way splitter.
  Reply With Quote