View Single Post
Old 5-Oct-2012, 4:31 PM   #2
teleview
Guest
 
Posts: n/a
Disconnect and remove the , preamp , the preamp power supply , the preamp power injector.

Disconnect and remove the MS2000.

Make sure the phasing lines of the HD8200U are connected correctly and not touching the boom as shown at http://www.winegarddirect.com.

Aim the HD8200U antenna at about 246 degree magnetic compass direction , WNYW UHF channel 44 FOX.

Connect a New long coax directly to HD8200U antenna and run the coax through a open window or door , directly to the New Plasma Tv.

Before connecting the One Long Coax that comes from the HD8200U antenna , remove any coax that is connected to the antenna connection on the Tv.

Digital Channels can develop , Digital Glitches.

Simply re scanning will often times not remove the Digital Glitches.

With No coax connected the Tv , You will do what is called a Double Rescan.

With No antenna connected to the Tv , Scan for Digital Broadcast Tv Channels , do not scan for cable Tv channels.

With No antenna connected to the Tv this , Clears Out , the tuner for a fresh scan for channels.

Now connect the antenna coax to the Tv and scan for channels.

Is WNYW Fox received now??

Last edited by teleview; 10-Oct-2012 at 1:06 AM.
  Reply With Quote