|
As I specific stated and provided a link , to make a point , It is the Clear Stream 2 Complete VHF/UHF antenna. The Clear Stream 2 Complete has the 2 loops UHF antenna part and the VHF Rods , dipoles , at the top of the antenna.
The UHF loops and the VHF rods are what receive the UHF and VHF channels.
The UHF loops and VHF Rods are required to receive UHF and VHF transmissions.
The ->Screen<- is what is removed. With the removal of the ->Screen<- the the UHF loops and VHF Rods will receive the UHF Tv channels 14 thru 51 and VHF Tv channels 7 thru 13 in 2 directions at the front of the antenna is 1 direction and the back of the antenna is the 2nd direction.
___________________________
And Yes I know what Antennas Direct says about there own CS2 Complete antenna ,
They call the VHF Rods , VHF reflectors.
The VHF rods Are Not VHF reflectors.
The VHF rods are metal VHF RECEPTION Elements.
I did my best to tell the person at Antennas Direct I was talking to on the phone the VHF rods Are Not reflectors , But in typical human behavior the person I was talking to at Antennas Direct dug in there heals and insisted on calling them VHF reflectors.
Last edited by teleview; 19-Oct-2012 at 2:09 PM.
|