http://www.tvfool.com/?option=com_wr...990027c93c8ecd
So, I have one of these for lightning protection:
http://www.amazon.com/TII-Broadband-.../dp/B00737FWLK
I've spent half the morning on the roof and off the roof trying to figure out why my new PA-19 amp was cutting my signal in half. It looks like power (or enough power) to the amp does not want to pass through the surge protector. If I pull it out of the loop and replace it with a simple connector, I see the boost I would expect from the amp. If this is expected behavior, what's the proper way to get lightning protection and still have power pass to the amp?
Many thanks.