I just put up a new CM2020 to replace my old Rat-Shack UHF-VHF Yagi with a 120 " boom (not sure of the model) The CM2020 has about the same specs and the same signal issues. After pointing with a direct line in to TV (Sony Bravia) I have 88% signal on best channel (local wyou) and 80% on worst channel (local wolf). When I add the 4 way splitter and then the diplexors I drop down to 80% on strong signal and 72% on weak channel losing about 8%. This is causing more pixelation and audio drop outs and even a total loss of signal at my FTA sat receiver OTA imput. What would be my best bet for getting my signal loss back or even improving it.
The 4 way splitter is to give me OTA to my Sony TV, 2 satalite receivers with OTA imputs and my Sony AV system. Diplexors are Terk and RCA and splitter is Rat-Shack.
I do not know how to incert the link or image/plot I just saved but the channels I need most are local WOLF 56, WNEP 16, WYOU 22, WBRE 28.
PS Thanks thom, here is the link
http://www.tvfool.com/modeling/tmp/9...getdigital.php