I mounted an RCA ANT751 on my chimney at about 25ft. About 50ft of cable runs to the side of my house where Comcast's cable once connected to the cabling that runs into my house. I disconnected Comcast's cable and connected the cable from the antenna. There, the cable runs through a Radio Shack signal amplifier - Model: 15-2505 | Catalog #: 15-2505. Then, the cable is split - one to the bedroom TV and one to the family room TV. The cable to the bedroom is 25ft, and the cable to the family room is probably 50ft with one coupler in-line, but I can't really tell how long it is, nor can I tell if there are any other splitters or couplers attached. The bedroom TV gets good reception, but the family room tv has drop-outs and pixelation on two channels. What could be the problem? My TV fool report -
http://www.tvfool.com/?option=com_wr...3616e14864bb6b
Thanks!
Howie