Kitztech preamp died...repairable?
1 Attachment(s)
All,
My kitztech preamp stopped working after about 5 years of use. I checked the 9VDC power supply and it works okay. I changed the preamp to my old winegard LNA-200 and it works fine, so there's no wiring problem. I took the preamp apart and attached a photo of the PC board. There is a voltage regulator on the board (LM317) and it shows some signs of "heat stress" but it doesn't look like it's burned out. The board is surface mount so I can barely see the components, let alone repair them! I think the component that says "321D" is the amplifier chip. Anyone have any advise on repairing these things? Thanks, Mike |
I've never had one go bad, even 5 years later. Regardless, I'd email Kitztech and ask them if they'd repair it. If you haven't already done so.
|
All times are GMT. The time now is 8:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC