TV Fool

TV Fool (http://forum.tvfool.com/index.php)
-   Forum Sandbox (http://forum.tvfool.com/forumdisplay.php?f=18)
-   -   TV SNR and Mediasonic HW150 Signal Quality Comparison (http://forum.tvfool.com/showthread.php?t=16815)

rabbit73 25-Jan-2021 4:21 AM

TV SNR and Mediasonic HW150 Signal Quality Comparison
 
10 Attachment(s)
TV SNR and Mediasonic HW150 Signal Quality Comparison

Knowing the SNR or signal quality of an OTA channel can be very helpful when comparing antennas or finding the best antenna location.

Since many TVs don't show SNR or signal quality, I did a comparison between SNR on my SONY TV and Signal Quality on the Mediasonic-HW-150.

Code:

TV SNR and Mediasonic HW150 Signal Quality Comparison

Channel 16 signal power with no attenuation:
 +3.3 dBmV (-47.5 dBm)

Attenuation  SONY SNR  Mediasonic HW150

NONE          31 dB          83%
30dB          24 dB          61%
30dB+Var      17 dB          42-43%
30dB+Var      16 dB          41%
30dB+Var      15 dB          39%
30dB+Var      14-15 dB        0-38%
30dB+Var      14 dB          0%  Severe pixelation
Variable attenuation was increased for desired SNR.

SETUP:
Ant > preamp 17dB > attenuator > 4-way splitter for:
1. SONY KDL-40R350D
2. Mediasonic HW150
3. Sadelco DisplayMax 800 Signal Level Meter
4. Airspy R2 SDR with Spectrum Spy software for
spectrum screenshots made at SNR 31, 24, and 15 dB

Other equipment used:
Channel Master 7777HD Preamp, at Low 17 dB
4-way splitter
10 dB fixed attenuator
20 dB fixed attenuator
0-20 dB Toner variable attenuator


CODE data above saved as image:

http://forum.tvfool.com/attachment.p...8&d=1611587864

Here are the screenshots of the CH16 signal at SNR 31, 24, and 15 dB:

http://forum.tvfool.com/attachment.p...9&d=1611588457

http://forum.tvfool.com/attachment.p...0&d=1611588474

http://forum.tvfool.com/attachment.p...1&d=1611588492

This is a screenshot of the Mediasonic HW150 for CH20 at the "Digital Cliff."

http://forum.tvfool.com/attachment.p...2&d=1611589019

The Mediasonic HW-150 has a built-in power supply and outputs for HDMI, Component, and Composite. (Composite is also known as CVBS for Composite Video Baseband Signal) The less expensive HW-130 has a separate wall-wart power supply and outputs for HDMI and Composite; no Component output.

http://forum.tvfool.com/attachment.p...4&d=1611761912

Both models are able to add a channel after scan, which is very useful if you have more than one antenna or a rotator. Tyler the Antenna Man uses the HW-130 for antenna comparisons.

http://forum.tvfool.com/attachment.p...3&d=1611760402

https://www.youtube.com/watch?v=YDQzvFG3chs


All times are GMT. The time now is 8:50 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC