![]() |
Tv Antennas and Reception
Because the Tv transmissions are Very Strong at your location I recommend use a coax ground block connected to a good ground like the electric service ground wire. This will help keep signals from going through the shield of the coax to the center wire that carries the signal.
|
Thanks, didnt know about terminating the ends of unused ports. and, the need to "ground" the attna.
|
Tv Antennas and Reception
Here is web site that is packed with basic and useful information , start with putting connectors on coax , http://www.swhowto.com/CoaxStrip.htm. It says use a 'Small' channel lock pliers to push and twist/turn the connector on to the coax. To tricky for me , I have been putting on connectors for many years , I hold the connector between my thumb and fingers and push and turn/twist the connector on to the coax cable.
|
All times are GMT. The time now is 7:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright © TV Fool, LLC