TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 28-Nov-2012, 7:18 PM   #1
bigcountry
Junior Member
 
Join Date: Nov 2012
Posts: 5
Complete newbie looking for direction

Hi - I've decided I'm done with paying for cable so I've been reading online about getting an antenna and cutting the cord.

Here's the map

http://www.tvfool.com/?option=com_wr...cc4957d53ce618


A couple of questions:

Do you need 1 antenna for each TV? I have one upstairs and one in the basement.

if not - do you use a splitter? how do you know if you need a simple splitter or something more powerful?

How do you know whether to do an attic install or a roof install?

Can someone recommend a good antenna for my situation?
bigcountry is offline   Reply With Quote
Old 28-Nov-2012, 7:48 PM   #2
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
You have a very good reception report. Lot's of strong signals and all from a single direction.

In your situation, it's very common to use one antenna and a passive splitter to feed several TVs.

An Antennas Direct DB2e facing NW will easily receive a strong signal that can be split. You'll get the best results mounting outdoors, but I would also expect good results if you attic mount, provided the materials used in your roof are not metal or otherwise inclined to block signals.
GroundUrMast is offline   Reply With Quote
Old 28-Nov-2012, 10:13 PM   #3
bigcountry
Junior Member
 
Join Date: Nov 2012
Posts: 5
thanks you for your reply. so would i buy this

http://www.bestbuy.com/site/Antennas...&skuId=4948308

do i need a mount like this or does it already come with it?

http://www.antennasdirect.com/store/..._J_Mounts.html

lastly, would radio shack have passive splitters?

thanks!
bigcountry is offline   Reply With Quote
Old 29-Nov-2012, 12:06 AM   #4
teleview
Guest
 
Posts: n/a
I recommend a Antennas Direct DB4e antenna aimed at about 305 degree magnetic compass direction.

Here is how the aim antennas , http://www.kyes.com/antenna/pointing/pointing.html.

Install the DB4e antenna above the roof in such a manner that the roof or house is not blocking reception to the north west.

The Digital Tv stations/channels to the - north west - are strong signal strength in the Green and Yellow reception zone.

No preamplifier is required.

For 1 Tv connected use no splitter.

For 2 Tv's connected use a common simple 2 way splitter.

For 3 Tv/s connected use a common simple 3 way splitter.

Common simple splitters can be bought at Home Depot or Lowes or Walmart.

______________________________________________________

Here are some above the roof antenna mounts , http://www.ronard.com/909911.html , http://www.ronard.com/34424560.html , http://www.ronard.com/ychim , http://www.ronard.com.

Buy the ronard antenna mounts at solidsignal by typing the word ronard in the solidsignal search box.

Yes the J type antenna mount can also be used.

Here are some places to buy antennas and etc. , http://www.solidsignal.com , http://www.amazon.com.

As always , trees and tree leaves do a real fine job of reducing or blocking Tv reception and so do buildings and other obstructions including your own house.

It is best to install the DB4e antenna at a location that has the least amount to no amount of obstructions of any type or kind in the direction of reception including your own house.

The Tv's Must Channel Scan for the Digital Broadcast Tv Channels , sometimes named the 'Air Channels' or 'Antenna Channels' in the Tv setup menu because the Tv transmissions travel through the air from the transmitting antenna to the receiving antenna.

DO NOT channel scan for cable tv channels.

Last edited by teleview; 5-Jan-2013 at 7:22 PM.
  Reply With Quote
Old 29-Nov-2012, 9:54 PM   #5
bigcountry
Junior Member
 
Join Date: Nov 2012
Posts: 5
thank you for your help
bigcountry is offline   Reply With Quote
Old 5-Jan-2013, 1:18 AM   #6
bigcountry
Junior Member
 
Join Date: Nov 2012
Posts: 5
i purchased all of the things above - could someone post a link to the type of cable I need to run from the antenna?
bigcountry is offline   Reply With Quote
Old 5-Jan-2013, 1:21 AM   #7
bigcountry
Junior Member
 
Join Date: Nov 2012
Posts: 5
is my antenna considered "A UHF Panel array"
I purchased the Antennas Direct DB4e as you recommended. Thanks!
bigcountry is offline   Reply With Quote
Old 5-Jan-2013, 1:23 AM   #8
teleview
Guest
 
Posts: n/a
RG-6 coax , HomeDepot or Lowes, etc. , have RG-6 coax.

Use RG-6 coax.

Yes the DB4e is a UHF panel array.

Last edited by teleview; 5-Jan-2013 at 1:27 PM.
  Reply With Quote
Old 5-Jan-2013, 4:35 AM   #9
phone man
Senior Member
 
Join Date: Aug 2011
Posts: 121
Yes it's a panel antenna. You need RG6 coaxial cable. Quad shield usually isn't necessary, the regular stuff is ok. Home Depot, Lowes etc will have this wire, connectors, connector installation tools, splitters, grounding blocks. I like compression style connectors. Get some silicone grease for any outdoor connections. If you need additional rubber weather boots a sparkplug boot works pretty good.
phone man is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 10:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC