TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 17-May-2018, 8:02 PM   #1
raym
Junior Member
 
Join Date: Apr 2018
Posts: 3
Suggestions for antenna

Hi guys, I'd really appreciate your thoughts on an antenna. I'd like to mount this on the roof of my one story suburban, North Carolina ranch. I live in a wooded area of pine trees. Its a concern but the trees aren't super dense. I've included a picture which is pretty much representative.

Here's my radar plot.

I'd love to be able to pick up both CBS and Fox. They're both about 43 miles away, And ABC, CW, NBC are about 33 miles and 180 degrees from the first two. And anything else would be a bonus.

Thoughts?
Attached Images
File Type: jpg trees.jpg (69.4 KB, 599 views)
raym is offline   Reply With Quote
Old 18-May-2018, 12:37 AM   #2
Nascarken
Banned
 
Join Date: Jun 2016
Posts: 346
What did you use for an ANTENNA

Quote:
Originally Posted by raym View Post
Hi guys, I'd really appreciate your thoughts on an antenna. I'd like to mount this on the roof of my one story suburban, North Carolina ranch. I live in a wooded area of pine trees. Its a concern but the trees aren't super dense. I've included a picture which is pretty much representative.

Here's my radar plot.

I'd love to be able to pick up both CBS and Fox. They're both about 43 miles away, And ABC, CW, NBC are about 33 miles and 180 degrees from the first two. And anything else would be a bonus.

Thoughts?
For your tv Fool report what did you put in for an ANTENNA?
Nascarken is offline   Reply With Quote
Old 18-May-2018, 12:59 AM   #3
raym
Junior Member
 
Join Date: Apr 2018
Posts: 3
For the height, I put in 20 ft (low house). Is that what you mean?
raym is offline   Reply With Quote
Old 18-May-2018, 1:34 AM   #4
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
Welcome to the forum, raym

Thank you for the report and the photo

Trees wiil block TV signals, but it is difficult to predict how much.

TVFool is using a defective database, so there are some errors in your report:



The list of channels from a rabbitears.info report is probably more accurate, but there are many changes going on because of UHF Repack by the FCC which will limit UHF to 14-36.



WTVD will be moving to real VHF High channel 9
https://www.rabbitears.info/market.p...&callsign=WTVD

WNCN will be moving from UHF channel 17 to VHF-High channel 8
https://www.rabbitears.info/market.p...&callsign=WNCN

WRAL from 48 to 17
https://www.rabbitears.info/market.p...&callsign=WRAL

and WRAZ from 49 to 15
https://www.rabbitears.info/market.p...&callsign=WRAZ

It looks like they will be in the same direction. You will need a UHF/VHF combo antenna like the Winegard HD7694P or 7698P. You might need a preamp, but try it first without.

If the antenna is outside, the coax shield should be grounded with a grounding block that is connected to the house electrical system ground with 10 gauge copper wire for electrical safety and to reject interference. For further compliance with the electrical code (NEC), the mast should also be grounded in a similar manner to drain any buildup of static charge which will tend to discourage a strike, but the system will not survive a direct strike.

Attached Images
File Type: jpg raymTVFreportTVF.JPG (109.2 KB, 1408 views)
File Type: jpg raymTVFreportRE.jpg (233.8 KB, 1421 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 18-May-2018 at 2:05 AM.
rabbit73 is offline   Reply With Quote
Old 18-May-2018, 8:54 AM   #5
raym
Junior Member
 
Join Date: Apr 2018
Posts: 3
Thanks Rabbit73, that's nice. The data is a lot more clear.

raym
raym is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 11:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC