TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 9-Jan-2012, 6:20 PM   #1
ChrisAntennahead
Junior Member
 
Join Date: Dec 2011
Location: Stamford CT
Posts: 19
Cool Signal: "Strength VS Quality"

Does a good primer on the above topic exist here or elsewhere?

If so I could use a good talking to, and my feelings won't be hurt!

I'll start off by saying that if the signal indicator on my TV or converter box is high but goes up and down, I.E. 80% for a given TV station but drops down to 20 then up to 75 and back down again, that would be a strong signal of poor quality - correct?

OTOH: If signal strengh varies only by 5% - I.E. 75%-80%, that constitutes both good strength and quality, right?

-Chris

Last edited by ChrisAntennahead; 9-Jan-2012 at 6:23 PM.
ChrisAntennahead is offline   Reply With Quote
Old 9-Jan-2012, 7:16 PM   #2
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,750
@ TV Fool

I'm not willing to call this a "good primer", just a quick attempt at some words on the subject: http://forum.tvfool.com/showthread.php?t=1514

Rapidly changing signal meter readings on most TV's is an indication (but not absolute proof) of multipath with one or more paths changing in length and or attenuation. Signal can bounce off of layers of the atmosphere, vehicles, foliage, etc., all of which can be in motion. The result will be that the signals from different paths combine at the receiving antenna, they may add - in phase - or subtract from one another - out of phase.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 9-Jan-2012 at 7:23 PM.
GroundUrMast is offline   Reply With Quote
Old 9-Jan-2012, 7:43 PM   #3
Dave Loudin
Senior Member
 
Join Date: Jan 2010
Location: King George, VA
Posts: 659
Ken Nist has a very nice tutorial (with diagrams!) on antenna siting that can help you understand this. See http://www.hdtvprimer.com/ANTENNAS/siting.html
Dave Loudin is offline   Reply With Quote
Reply

Bookmarks

Tags
quality, signal strength

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 8:47 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC