TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 8-Jun-2012, 2:52 PM   #1
meazz12
Member
 
Join Date: May 2012
Location: Auburn, GA
Posts: 37
Suggestion for suitable location of Amp’s power inserter

I received my ClearStream Complete VHF/UHF Antenna Combo Pack and CPA19 ClearStream Pre-Amplifier Kit yesterday. I am trying to figure out the best place to attach the power inserter for the amp.
The antenna will be installed on top of a wooden privacy fence pole in the backyard of my house. The splitter for living room and bed room TV will be in a box attached to the outside wall.
To get the best out of the pre amp, I am thinking of running 2 long coaxial cable (To receiver, To inserter) from the power inserter.
The inserter will be placed right below the amp with the antenna on the fence. Out of this 2 coaxial, one will go indoor to be used with power adapter. The other one coming from the power inserter will go to the splitter outside. The distance from the antenna to the power outlet inside the house is approximately 35 feet.
Any suggestion would be appreciated.
meazz12 is offline   Reply With Quote
Old 8-Jun-2012, 3:50 PM   #2
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
We have diagrams for splitter/power inserter placement on our website.

One of these diagrams will apply:

http://www.antennasdirect.com/cmss_f...itter_Opt1.pdf
http://www.antennasdirect.com/cmss_f...itter_Opt2.pdf

Contact us directly if you need additional assistance.


Cheers!
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.

Last edited by ADTech; 8-Jun-2012 at 3:53 PM.
ADTech is offline   Reply With Quote
Old 8-Jun-2012, 5:58 PM   #3
meazz12
Member
 
Join Date: May 2012
Location: Auburn, GA
Posts: 37
ADTech, thanks for the above links.
what is an acceptable distance between the pre-amp and the power inserter?

Last edited by meazz12; 8-Jun-2012 at 6:02 PM.
meazz12 is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 9:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC