TV Fool  

Go Back   TV Fool > Over The Air Services > Special Topics > Reception Devices

Notices

Reply
 
Thread Tools
Old 21-Dec-2010, 1:40 AM   #1
rickcain
Member
 
Join Date: Dec 2010
Posts: 65
Unhappy Silly question about Baluns....

Do they have polarity? Would signal be affected if you hooked them up backwards? I don't really see anything on them that looks like a polarity key but then again I haven't really looked at one close, I just hook them up and forget about them.
rickcain is offline   Reply With Quote
Old 21-Dec-2010, 2:33 AM   #2
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,681
Not silly IMO...

Yes, baluns have polarity. But when used in a typical installation, the polarity is irrelevant. When used to connect an antenna to coax or coax to tuner, you are correct to
Quote:
just hook them up and forget about them.
An uncommon application where polarity would matter is joining or stacking identical antennas. This is so uncommon that you will probably not ever find a balun with polarity marked or labeled. If you are interested, Antenna Stacking & Transformer Phasing Tutorial
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 22-Feb-2011 at 11:37 PM. Reason: Label URL links
GroundUrMast is offline   Reply With Quote
Old 21-Dec-2010, 2:40 AM   #3
John Candle
Senior Member
 
Join Date: Jun 2010
Posts: 2,697
Balun / Matching transformer /

Have no polarity when used to match 300 to 75 and 75 to 300 in a typical tv antenna installation. The balun can be turned around and used in the other direction. An example is , a Winegard HD7082P antenna has 75 impedance connection and a preamp has a 300 impedance input , the coax from the antenna is connected to the 75 impedance end of the balun and the 300 impedance end of the balun is connected to the input of a preamp that has a 300 impedance input. Or it could be the other way around , the antenna has 300 impedance connection and the preamp has the 75 impedance input. A typical balun is a few turns of wire on a ferrite core. The inexpensive ones are a metal tube and the inside is easy to slide out of the tube , take it apart and have a look.

Last edited by John Candle; 23-Dec-2010 at 6:31 AM.
John Candle is offline   Reply With Quote
Reply

Bookmarks

Tags
balun hdtv 300 ohm

Go Back   TV Fool > Over The Air Services > Special Topics > Reception Devices


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 9:39 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC