TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 18-Oct-2011, 2:06 AM   #1
Cameo
Junior Member
 
Join Date: Oct 2011
Posts: 4
Will an antenna free me of cable company's clutch?

Can you recommend an antenna (attic or rooftop) for my location in Pleasanton, CA?

This may be a tough one. I'm in the east bay of the greater San Francisco bay area and located near the base of Pleasanton Ridge, which effectively blocks LOS of San Francisco's Sutro tower. I'm in a townhouse, so an attic antenna will be 20-25 feet high and rooftop approximately 30 feet high.

Here's the link to my TV signal analysis: http://www.tvfool.com/?option=com_wr...60b55991f56117

Thanks for the assistance.
Cameo is offline   Reply With Quote
Old 18-Oct-2011, 3:09 AM   #2
John Candle
Senior Member
 
Join Date: Jun 2010
Posts: 2,697
Tv Antennas and Reception

How many tv's are/will be connected??
John Candle is offline   Reply With Quote
Old 18-Oct-2011, 3:30 AM   #3
John Candle
Senior Member
 
Join Date: Jun 2010
Posts: 2,697
Tv Antennas and Reception

This recommendation is based on the tvfool pending applications included , only digital , channels. I recommend a Winegard HD7082P antenna aimed at about 265 degree magnetic compass. Here is how to aim antennas , http://www.kyes.com/antenna/pointing/pointing.html , Here are some mountings , http://www.ronard.com/909911.html , http://www.ronard.com/34424560.html , http://www.ronard.com/ychim.html , Here are places to buy antennas and etc. , http://www.winegarddirect.com , http://www.solidsignal.com , http://www.amazon.com , http://www.starkelectronic.com , http://www.3starinc.com
John Candle is offline   Reply With Quote
Old 18-Oct-2011, 3:32 AM   #4
John Candle
Senior Member
 
Join Date: Jun 2010
Posts: 2,697
Tv Antennas and Reception

How many tv's are/will be connected??
John Candle is offline   Reply With Quote
Old 19-Oct-2011, 2:42 PM   #5
Cameo
Junior Member
 
Join Date: Oct 2011
Posts: 4
Thanks for the reply. Currently there are 4 TVs with the possibility of a 5th.
Cameo is offline   Reply With Quote
Old 19-Oct-2011, 5:36 PM   #6
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
That is a challenging bit of terrain you're up against. I'd use 'the big guns', all roof mounted.

For UHF, an Antennas Direct XG-91, For high-VHF, the Winegard YA-1713.

If any of the stations on real channel 2 through 6 interest you, (there are some already on the air and others are pending, a Winegard YA-6260 is one option, The HD5030 is another option that would replace the YA-1713 at the cost of about 2 dB on channel 7 (KGO). When adjusting aim, an intentional tilt up at the ridge-line may eek out a bit more signal.

You would need a UVSJ for any of theses combinations. The XG-91 + YA-1713 + YA-6260 combination would need a HLSJ to combine the YA-1713 and YA-6260 signals before joining the UHF signals at the UVSJ.

A good low noise preamp such as the Antennas Direct CPA-19 will also be needed.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 20-Oct-2011 at 1:31 PM.
GroundUrMast is offline   Reply With Quote
Old 22-Oct-2011, 6:16 AM   #7
Cameo
Junior Member
 
Join Date: Oct 2011
Posts: 4
I figured the terrain in my area would make for a tough one. Thanks for the info. I'll have to see if my association CC&R allows for one of these "big guns."
Cameo is offline   Reply With Quote
Old 22-Oct-2011, 5:08 PM   #8
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
The FCC is actually on your side... http://www.fcc.gov/guides/over-air-r...n-devices-rule
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')
GroundUrMast is offline   Reply With Quote
Old 22-Oct-2011, 6:33 PM   #9
Cameo
Junior Member
 
Join Date: Oct 2011
Posts: 4
Excellent information, GroundUrMast! I was unaware of this FCC regulation until now. Thanks!

Do your recommended antennas meet the rule of a maximum of one meter diagonal measurement?
Cameo is offline   Reply With Quote
Old 22-Oct-2011, 8:32 PM   #10
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
I'm not a lawyer and I don't play one on TV...

Per the FCC:
Quote:
The following antennas or dishes are covered by these rules:

* A "dish" antenna one meter (39.37 inches) or less in diameter (or any size dish if located in Alaska), designed to receive direct broadcast satellite service, including direct-to-home satellite service, or to receive or transmit fixed wireless signals via satellite.
* An antenna that is one meter or less in diameter and is designed to receive video programming services via broadband radio service (wireless cable), or to receive or transmit fixed wireless signals other than via satellite.
* An antenna that is designed to receive local television broadcast signals.
I read the FCC as describing three separate and distinct types of antennas. I read the third in the list as the type you and I would use. I see no size restriction for the OTA TV antenna, which makes sense when you look at the size requirements for low-VHF and fringe area antennas.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')
GroundUrMast is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 6:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC