TV Fool  

Go Back   TV Fool > Over The Air Services > Special Topics > Antennas

Notices

Reply
 
Thread Tools
Old 19-Oct-2019, 10:13 PM   #1
mikecandu
Member
 
Join Date: Oct 2014
Posts: 31
Kitztech preamp died...repairable?

All,

My kitztech preamp stopped working after about 5 years of use. I checked the 9VDC power supply and it works okay. I changed the preamp to my old winegard LNA-200 and it works fine, so there's no wiring problem.

I took the preamp apart and attached a photo of the PC board. There is a voltage regulator on the board (LM317) and it shows some signs of "heat stress" but it doesn't look like it's burned out. The board is surface mount so I can barely see the components, let alone repair them! I think the component that says "321D" is the amplifier chip.

Anyone have any advise on repairing these things?

Thanks,

Mike
Attached Images
File Type: jpg kitztech preamp.jpg (100.2 KB, 81 views)
mikecandu is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Special Topics > Antennas


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 7:10 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC