TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 19-Jun-2012, 3:14 PM   #1
ghoops50
Junior Member
 
Join Date: Jun 2012
Posts: 1
Antenna Selection Help

Greetings,

I would like to cut the cord on cable and install a new Outdoor Antenna for my house. I do not have restrictions on the size of the antenna. It will be mounted from a pole on my chimney.

Here is my TV Analysis: http://www.tvfool.com/?option=com_wr...13492868954d70

I would like to get an antenna that might be able to pick up ABC in our area. We do live in the mountains and that signal is the weakest. Thanks.
ghoops50 is offline   Reply With Quote
Old 19-Jun-2012, 4:36 PM   #2
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,798
You're exactly on the wrong side of Poor Mountain to easily get WSET. Even their channel 5 translator is likely not available to you. You'll likely need a very large high-VHF antenna just for that one station while the rest of your Roanoke locals should be easy (low-VHF + UHF).

There are several ways to approach the challenge:

1) Go with a large all-channel antenna that has sufficient reception for WSET. It will be overkill for the Poor Mountain stations, but it should work well. Add a rotor to explore reception in other directions if desired. This will maximize overall reception.

2) IF Roanoake-only is okay, then install two antennas - a small all channel for everything except WSET plus a large high-VHF antenna combined with a channel 13 Jointenna or similar.

Much depends on what your over-all goal might be.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 19-Jun-2012, 10:01 PM   #3
signals unlimited
Senior Member
 
Join Date: Mar 2012
Location: south-central PA.
Posts: 453
Use a Winegard HD7698P and a Channel Master 9521A rotor. This will receive WSET 13 and all of the UHF and High VHF stations from Roanoke. Dont use a Pre-amplifier. If you are connecting more than 3 sets you should consider using a distribution amplifier.

Test run the rotor on the ground using a short three conductor cable. Leave it at the counter clockwise end of rotation. Install with the antenna pointed to 0 degrees magnetic. you will be able to use the 360 degree display to locate many channels.
signals unlimited is offline   Reply With Quote
Old 19-Jun-2012, 10:39 PM   #4
Electron
Senior Member
 
Join Date: Nov 2011
Posts: 1,832
ALL questions and answers about Broadcast Tv Reception and More.

Your location has receivable Tv stations/channels in ALL 3 Tv Bands , VHF low band channels 2 thru 6 , VHF high band channels 7 thru 13 , UHF band channels 14 thru 51.

The HD7698P antenna Is Not a all channel antenna.

Install a Winegard HD8200U All Channel antenna.

No antenna rotor is required , For reception of All the Networks and more including WSET ABC install a Winegard HD8200U antenna aimed at about 77 degree magnetic compass.

Here is how to aim antennas , http://www.kyes.com/antenna/pointing/pointing.html.

Here are some strong and sturdy antenna mounts , http://www.ronard.com/909911.html , http://www.ronard.com/34424560.html , http://www.ronard.com/ychim.html , http://www.ronard.com.
Buy the ronard antenna mounts at solidsignal by typing the word ronard in the solidsignal search box.

Here are places to buy antennas and etc. , http://www.solidsignal.com , http://www.winegarddirect.com , http://www.amazon.com.

For 1 or 2 Tv's connected no amplifier is required.

For 3 or 4 Tv's connected use a Channel Master CM3414 distribution amplifier.

Last edited by Electron; 19-Jun-2012 at 10:55 PM.
Electron is offline   Reply With Quote
Old 19-Jun-2012, 10:44 PM   #5
Electron
Senior Member
 
Join Date: Nov 2011
Posts: 1,832
ALL questions and answers about Broadcast Tv Reception and More.

The Tv/s Must scan for the Broadcast Tv channels some times named the 'Air Channels' or 'Antenna Channels' in the Tv set up menu because the Tv transmissions travel through the air from the transmitting antenna to the receiving antenna.

DO NOT scan for cable tv channels.
Electron is offline   Reply With Quote
Old 19-Jun-2012, 11:04 PM   #6
signals unlimited
Senior Member
 
Join Date: Mar 2012
Location: south-central PA.
Posts: 453
The 8200 is a very large antenna and would only be needed if you want to receive PBS channel 3.

If size is not an issue, the 8200 is a very good all channel antenna.
signals unlimited is offline   Reply With Quote
Old 19-Jun-2012, 11:27 PM   #7
Electron
Senior Member
 
Join Date: Nov 2011
Posts: 1,832
ALL questions and answers about Broadcast Tv Reception and More.

Thats why I recommend a ALL Channel Antenna , WBRA-DT Real Channel 3 PBS is transmitting on channel 3.

And the large ALL Channel Antenna Will Provide Reliable reception of WSET ABC.
Electron is offline   Reply With Quote
Reply

Bookmarks

Tags
antenna help

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 5:55 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC