TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 27-Feb-2015, 6:22 PM   #1
mars1162
Junior Member
 
Join Date: Feb 2015
Posts: 21
Coax lengths from 2 antennas to Preamp

This is the equipment that I am dealing with @ my brothers location. 30 foot of rohn tower with about 7 or 8 feet of mast above tower with a ham 4 rotator in tower. It has 2 antennas mounted in the same direction on mast pipe. They may be about 3 feet apart verticaly. The top antenna is a Winegard hd-9095 and the lower antenna is a Winegard ya 1713. These antennas are connected to a dual input preamp. The preamp is a Winegard AP 2870 with seperate input for the vhf and for the uhf antennas. I just cut coax to fit to from antennas to amp. I am wondering if the length of coax from antenna to preamp should be the same? Something else I was wondering is since this pre amp has about 2.9 db of noise on both uhf and vhf with 17 db gain on vhf and 19db of gain on uhf would I be better off with a different preamp and a low loss combiner or diplexer?http://www.tvfool.com/?option=com_wr...f1f0bdb2dfb970 This is the location and I am just not satisfied with results. I have drop out on some of the local stations and I am not sure what is going on. I would appreciated any suggestions Thanks John
mars1162 is offline   Reply With Quote
Old 27-Feb-2015, 7:26 PM   #2
Tower Guy
Senior Member
 
Join Date: Dec 2009
Location: Delmar, NY
Posts: 1,158
You are having problems with too much signal for a preamp. Get a UVSJ instead. The coax lengths won't matter.
Tower Guy is offline   Reply With Quote
Old 28-Feb-2015, 2:51 AM   #3
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,758
Unless there are obstructions such as trees or structures to contend with...

I agree, the signal levels shown in your TVFR strongly argue against the use of any amplification. (only if you are dealing with unusually long cable runs and splitting losses would I consider using a distribution amplifier.)

I would expect a smaller, less directional antenna such as the RCA ANT-751R would be a far better fit to the signal conditions shown. No amp or combiner would be needed either. (Even unamplified rabbit ears should do well in these conditions provided the building construction doesn't block signals.)
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 28-Feb-2015 at 2:54 AM.
GroundUrMast is offline   Reply With Quote
Reply

Bookmarks

Tags
coax length

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 7:33 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC