TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 18-Nov-2015, 2:20 PM   #1
JimMcGowanPMCM
Junior Member
 
Join Date: Aug 2015
Posts: 8
2 Antenna's, 1 Mast, Not Combined

I would like to mount 2 Low band VHF TV antennas on the same mast about 160 degrees directional difference. I need to monitor two TV stations. One in NY and one in PA. I will NOT be combining the signals. They will have separate coax runs and feed separate TVs.

The question is do I need to be concerned how far apart I mount the antennas. Is several inches ok, or do I need a specific minimum distance.

They will be identical antennas on the same pipe.

Thanks
Jim
JimMcGowanPMCM is offline   Reply With Quote
Old 18-Nov-2015, 2:46 PM   #2
MikeBear
Member
 
Join Date: Jan 2015
Location: Mid-Michigan - Retired on Beta Omicron Delta III
Posts: 84
Two low band VHF antenna's should be mounted about 5 FEET apart minimum, if they are on the same mast. If not, they will affect each other in some way depending on your circumstances.

Last edited by MikeBear; 18-Nov-2015 at 2:48 PM.
MikeBear is offline   Reply With Quote
Old 18-Nov-2015, 2:47 PM   #3
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
The general rule is 1/2 wave for the lowest frequency:
http://www.tonercable.com/pdf/antenna.pdf
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html
rabbit73 is offline   Reply With Quote
Old 18-Nov-2015, 3:34 PM   #4
Stereocraig
Senior Member
 
Join Date: Sep 2012
Posts: 472
That, is a lot of wind load for a single mast, so plan accordingly.
Stereocraig is offline   Reply With Quote
Old 18-Nov-2015, 3:58 PM   #5
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Tower Guy, IMHO, probably has the most experience with low-VHF, perhaps he'll chime in.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 19-Nov-2015, 12:31 AM   #6
Tower Guy
Senior Member
 
Join Date: Dec 2009
Location: Delmar, NY
Posts: 1,236
Let's see; 1/2 wavelength on channel 6 is 5.8 feet. On channel 2 that's 8.6'. That's a bare minimum for modest interaction between the antennas. The real question is can you live with some coupling between the antennas? With strong signals, LOS paths, and minimum reflections you can get by with closer antennas. You'd be best off separating the antennas horizontally and positioned so that they do not aim at each other.
Tower Guy is offline   Reply With Quote
Old 19-Nov-2015, 5:43 PM   #7
JimMcGowanPMCM
Junior Member
 
Join Date: Aug 2015
Posts: 8
Wind Load is not a concern because this is a temporary setup and if it gets windy I will just take it down but weight is a concern. I am using a pneumatic 30' Clark Mast and its limited to 20 lbs. Each antenna is 6.5 lbs. The bad news for me is I need to get Channel 2 and Channel 3 so per Tower Guy that's 8.5 feet separation. To go horizontal Clark has a 1 meter T-bar.

http://www.clarkmasts.com/mast-acces...-mast-adpater/

This bar would get the antennas only 1 Meter apart and one antenna would only be 8" above the other. Its about 160 degrees direction difference but a mere 1 meter horizontal and 8" vertical separation doesn't sound like it will prevent issues. If I only care about one Channel on each antenna would a notch filter or other device allow closer mounting?

Thank you for the advice.
Attached Images
File Type: jpg MobileAntennaSmall.jpg (79.7 KB, 724 views)
JimMcGowanPMCM is offline   Reply With Quote
Old 19-Nov-2015, 6:24 PM   #8
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Do your antennas have their mast clamps at the rear of their boom(s) or at the center of mass or pressure?
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 19-Nov-2015, 11:30 PM   #9
Tower Guy
Senior Member
 
Join Date: Dec 2009
Location: Delmar, NY
Posts: 1,236
Go with your original plan for vertical stacking. Try 5' anyway, it might work OK.

Few low band antennas have rear mount options.
Tower Guy is offline   Reply With Quote
Old 20-Nov-2015, 1:00 AM   #10
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Yeah, I wouldn't expect them to, but we have no idea what he's using. If they did have rear mounting capability, most of each antenna would not be over each other and the distance requirements could be substantially relaxed without affecting reception very much.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote
Old 20-Nov-2015, 2:49 AM   #11
JimMcGowanPMCM
Junior Member
 
Join Date: Aug 2015
Posts: 8
Quote:
Originally Posted by ADTech View Post
Do your antennas have their mast clamps at the rear of their boom(s) or at the center of mass or pressure?
Center of Mass, but its nothing more then holes drilled in the aluminum. I could drill a second set of mounting holes near the back of the antenna. I would have to get the balance close on both antennas to keep from stressing the mast but that may be ok with the T-Bar. The antennas are very light, only 4.5 lbs each. At 160 degrees I could probably keep the overlap to a single element.

Last edited by JimMcGowanPMCM; 20-Nov-2015 at 3:06 AM.
JimMcGowanPMCM is offline   Reply With Quote
Old 20-Nov-2015, 2:52 AM   #12
JimMcGowanPMCM
Junior Member
 
Join Date: Aug 2015
Posts: 8
They are both Channel Master Yagi 5-2-6's

http://www.solidsignal.com/pview.asp?p=y5-2-6

One antenna on the mast at a time I have received a good signal at 52 Miles.
JimMcGowanPMCM is offline   Reply With Quote
Old 20-Nov-2015, 3:05 AM   #13
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
Those antennas were made by AntennaCraft. Handle them with care because AntennaCraft is no longer on the scene and there are no replacements.
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html
rabbit73 is offline   Reply With Quote
Old 20-Nov-2015, 3:08 AM   #14
JimMcGowanPMCM
Junior Member
 
Join Date: Aug 2015
Posts: 8
Which method should I try? 5' spacing on the same mast or moving the mounting brackets back and getting a T-Bar?
JimMcGowanPMCM is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 3:27 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC