TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception

Notices

Reply
 
Thread Tools
Old 30-Oct-2012, 5:52 AM   #21
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
If you're already seeing 8 & 10 with the DB8, I expect an antenna designed for the task will perform very well. The Y10713 is designed to receive real channels 7 through 13, the DB8 is not. Of all the consumer grade antennas available, the Y10713 and Winegard's competing YA1713 are the best performers for going after 8 & 10.
GroundUrMast is offline   Reply With Quote
Old 5-Nov-2012, 4:15 AM   #22
760side
Member
 
Join Date: Aug 2012
Location: Oceanside Ca
Posts: 34
so a little disappointment today

i aimed the Y10713 at 159 magnetic
db 8 is still pointed at approx 135
joined the db8 and with a uvsj (CHANNEL PLUS 2512 DC + IR Passing 2-Way Splitter/Combiner)
the out of the usvj is connected to the in on the cpa-19
the to tv of the cpa 19 is rg6 all the way down to a wall plate splitter so it looks like this

UHF Antenna
|
UVSJ -->cpa-19-------wall plate--Power Supply Inside--> TV
|
VHF Antenna

All that said i did a scan and I only get 1-2 channels....where as with the db8 only i was getting 8-12 channels. So my troubleshooting will be to remove the amp and do another scan. Any other thoughts or suggestions?
760side is offline   Reply With Quote
Old 5-Nov-2012, 8:50 AM   #23
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
The CHANNEL PLUS 2512 DC + IR Passing 2-Way Splitter/Combiner is not a UVSJ. The splitter is allowing the two antennas to 'fight' each other.

A UVSJ is a tuned filter network, not a mere splitter in reverse. It will have a port that passes only UHF frequencies, another port that passes only VHF frequencies and a 'common' / 'combined' port.

Try a real UVSJ:

http://www.solidsignal.com/pview.asp...nna-%28UVSJ%29
http://www.radioshack.com/product/in...ductId=2103923
http://www.amazon.com/Antennas-Direc...Direct+UHF+VHF
GroundUrMast is offline   Reply With Quote
Old 5-Nov-2012, 3:10 PM   #24
760side
Member
 
Join Date: Aug 2012
Location: Oceanside Ca
Posts: 34
dang it!!!! i had a feeling it was that uvsj. Thats what I get for going off the reviews on amazon. Well at least its a pretty easy fix and it gives me another reason to hop up on my roof.
760side is offline   Reply With Quote
Old 8-Nov-2012, 1:18 AM   #25
760side
Member
 
Join Date: Aug 2012
Location: Oceanside Ca
Posts: 34
So the right equipment always helps. I picked up the radio shack uvsj. I used my same set up with the individual uhf and vhf antennas with the amp after the uvsj. I did my initial scan and get all the channels Im looking for and they are all full signal strength. Hopefully I wont run into any more drop outs now.

Thanks all for the help..
760side is offline   Reply With Quote
Reply

Bookmarks

Go Back   TV Fool > Over The Air Services > Help With Reception



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT. The time now is 7:15 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC